53.2.0
Page 1/8
Safety data sheet according to 1907/2006/EC, Article 31 Printing date 03.12.2021 *
Version number 7
Revision: 03.12.2021
SECTION 1: Identification of the substance/mixture and of the company/undertaking · 1.1 Product identifier · Trade name: ASODUR-LE (A-Komp.) · 1.2 Relevant identified uses of the substance or mixture and uses advised against No further relevant information available. · Application of the substance / the mixture Epoxy coating · 1.3 Details of the supplier of the safety data sheet · Manufacturer/Supplier: SCHOMBURG GmbH & Co. KG Aquafinstr. 2-8 D-32760 Detmold Germany ---------------------------------------------Tel: ++49 (0)5231/953-00 email: info@schomburg.de · Informing department: Product Safety Department Tel: ++49 (0)5231/953-770 email: SDB@schomburg.de
*
SECTION 2: Hazards identification · 2.1 Classification of the substance or mixture · Classification according to Regulation (EC) No 1272/2008 environment Aquatic Chronic 2 H411 Toxic to aquatic life with long lasting effects.
Skin Irrit. 2 Eye Irrit. 2 Skin Sens. 1
H315 Causes skin irritation. H319 Causes serious eye irritation. H317 May cause an allergic skin reaction.
· 2.2 Label elements · Labelling according to Regulation (EC) No 1272/2008 The product is classified and labelled according to the CLP regulation. · Hazard pictograms GHS07, GHS09 · Signal word Warning · Hazard-determining components of labelling: 2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane Reaction products of hexane-1,6-diol with 2-(chloromethyl)oxirane (1:2) · Hazard statements H315 Causes skin irritation. H319 Causes serious eye irritation. H317 May cause an allergic skin reaction. H411 Toxic to aquatic life with long lasting effects. · Precautionary statements P261 Avoid breathing dust/fume/gas/mist/vapours/spray. (Contd. on page 2) GB
Page 2/8
Safety data sheet according to 1907/2006/EC, Article 31 Printing date 03.12.2021
Trade name: ASODUR-LE (A-Komp.) (Contd. of page 1)
P280
Wear protective gloves/protective clothing/eye protection/face protection/hearing protection. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P363 Wash contaminated clothing before reuse. P501 Dispose of contents/container in accordance with local/regional/national/ international regulations. · 2.3 Other hazards · Results of PBT and vPvB assessment · PBT: Not applicable. · vPvB: Not applicable. *
SECTION 3: Composition/information on ingredients · 3.2 Chemical characterisation: Mixtures · Description: Solvent- free preparation based on Bisphenol-A-Epichlorhydrin resin molecular weight 700. · Dangerous components: CAS: 1675-54-3 2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)] 50-100% EINECS: 216-823-5 bisoxirane Index number: 603-073-00-2 Aquatic Chronic 2, H411; Skin Irrit. 2, H315; Eye Irrit. 2, H319; Skin Sens. 1, H317 Specific concentration limits: Skin Irrit. 2; H315: C ≥ 5 % Eye Irrit. 2; H319: C ≥ 5 % CAS: 933999-84-9 EC number: 618-939-5
Reaction products of hexane-1,6-diol with 2-(chloromethyl) oxirane (1:2) Skin Irrit. 2, H315; Eye Irrit. 2, H319; Skin Sens. 1, H317; Aquatic Chronic 3, H412
25-50%
· Additional information Contains epoxide-compounds. Note the index of the manufacturer. For the wording of the listed hazard phrases refer to section 16. SECTION 4: First aid measures · 4.1 Description of first aid measures · General information Personal protection for the First Aider. It is possible to choke in case of vomiting in unconsciousness. Bring unconscious persons into a stable position on side. Keep the respiratory tract free (remove dentures and vomiting). Check the pulse. In case of heart failure you have to make a cardiac massage. In case of stoppage of breathing: artificial respiration. Take up a doctor immediately! · After inhalation Supply fresh air; consult doctor in case of symptoms. · After skin contact Change immediately contaminated clothes. Instantly wash with water and soap and rinse thoroughly. Don't use solvents to clean the skin. · After eye contact Rinse opened eye for several minutes under running water. Then consult doctor. · After swallowing Do not induce vomiting; instantly call for medical help. Show the packaging or the label to the doctor. · 4.2 Most important symptoms and effects, both acute and delayed No further relevant information available. (Contd. on page 3) GB
Page 3/8
Trade name: ASODUR-LE (A-Komp.) (Contd. of page 2)
· 4.3 Indication of any immediate medical attention and special treatment needed No further relevant information available. SECTION 5: Firefighting measures · 5.1 Extinguishing media · Suitable extinguishing agents CO2, extinguishing powder or water jet. Fight larger fires with water jet. · 5.2 Special hazards arising from the substance or mixture Formation of poisonous gases during heating or in fires. · 5.3 Advice for firefighters · Protective equipment: Wear self-contained breathing apparatus. · Additional information Dispose of fire debris and contaminated fire fighting water in accordance with official regulations. SECTION 6: Accidental release measures · 6.1 Personal precautions, protective equipment and emergency procedures Ensure adequate ventilation Avoid eye- and skin contact. Wear protective equipment. Keep unprotected persons away. Do not breath in vapour. Keep away from ignition sources · 6.2 Environmental precautions: Do not allow product to reach sewage system or water bodies. Build barriers with sand, soil or other sealings. · 6.3 Methods and material for containment and cleaning up: Absorb with liquid-binding, inflammable material (sand, diatomite, acid binders, universal binder). · 6.4 Reference to other sections See Section 7 for information on safe handling See Section 8 for information on personal protection equipment. See Section 13 for information on disposal. *
SECTION 7: Handling and storage · 7.1 Precautions for safe handling Keep containers tightly sealed. Work with fresh air supply, keep doors and windows open. Keep away from heat and direct sunlight. Avoid splashes. Do not spray on hot surfaces. Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols. Keep away from children. · Information about protection against explosions and fires: No special measures required. · 7.2 Conditions for safe storage, including any incompatibilities · Storage · Requirements to be met by storerooms and containers: Do not leave open containers. Do not store in common rooms. · Information about storage in one common storage facility: Store away from foodstuffs. Please follow the rules of the VCI-Storage-Concept for chemicals. · Further information about storage conditions: Protect from frost. Keep container tightly sealed. (Contd. on page 4) GB
Page 4/8
Trade name: ASODUR-LE (A-Komp.) (Contd. of page 3)
· 7.3 Specific end use(s) No further relevant information available. *
SECTION 8: Exposure controls/personal protection · 8.1 Control parameters · Additional information about design of technical systems: It must be possible to wash the skin in the working area. Eye-wash bottle must be available. · Components with critical values that require monitoring at the workplace: The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace. · Additional information: The lists that were valid during the compilation were used as basis. · 8.2 Exposure controls · Personal protective equipment · General protective and hygienic measures Before starting work and after each break apply low-fat or fat-free skin cream on all uncovered parts of the body. Clean skin only with cleaning agent especially for epoxy resin. Don't use solvent for skin cleaning! Clean clothes which are contaminate with epoxi resin before unsing again. The usual precautionary measures should be adhered to in handling the chemicals. Instantly remove any soiled and impregnated garments. Wash hands during breaks and at the end of the work. Avoid contact with the eyes and skin. · Breathing equipment: Use breathing protection only when aerosol or mist is formed. Filter P2. · Protection of hands: Hand Protection: Nitril-rubber-latex-gloves. · Material of gloves Nitril-rubber-latex-gloves II R: Thickness 0,5mm; Penetration time 480 min The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. · Penetration time of glove material The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed. · Eye protection: Tightly sealed safety glasses. · Body protection: Protective work clothing.
SECTION 9: Physical and chemical properties · 9.1 Information on basic physical and chemical properties · General Information · Appearance: Form: Liquid Colour: Colourless · Smell: Weak, characteristic · Odour threshold: Not determined. · pH-value:
Mixture is non-soluble (in water).
· Change in condition Melting point/freezing point: Not determined Initial boiling point and boiling range: >200 °C · Flash point:
130 °C (Contd. on page 5) GB
Page 5/8
Trade name: ASODUR-LE (A-Komp.) (Contd. of page 4)
· Inflammability (solid, gaseous)
Not applicable.
· Ignition temperature:
235 °C
· Decomposition temperature:
Not determined.
· Self-inflammability:
Product is not selfigniting.
· Explosive properties:
Product is not explosive.
· Critical values for explosion: Lower: Upper:
Not determined. Not determined.
· Steam pressure at 20 °C:
0.1 hPa
· Density at 20 °C · Relative density · Vapour density · Evaporation rate
1.12 g/cm³ Not determined. Not determined. Not determined.
· Solubility in / Miscibility with Water:
Not miscible or difficult to mix
· Partition coefficient: n-octanol/water:
· Viscosity: dynamic at 20 °C: kinematic:
1,588 mPas Not determined.
· 9.2 Other information
No further relevant information available.
SECTION 10: Stability and reactivity · 10.1 Reactivity No further relevant information available. · 10.2 Chemical stability · Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications. · 10.3 Possibility of hazardous reactions Reacts with alkali, amines and strong acids · 10.4 Conditions to avoid No further relevant information available. · 10.5 Incompatible materials: Can react with acid and oxidizing agents. · 10.6 Hazardous decomposition products: În case of heating dangerous decomposition products can be arise.
SECTION 11: Toxicological information · 11.1 Information on toxicological effects · Acute toxicity Based on available data, the classification criteria are not met. · LD/LC50 values that are relevant for classification: 1675-54-3 2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane Oral LD50 >15,000 mg/kg (rats) Dermal LD50 23,000 mg/kg (Kan) 933999-84-9 Reaction products of hexane-1,6-diol with 2-(chloromethyl)oxirane (1:2) Oral LD50 2,190 mg/kg (rats) Dermal LD50 >2,000 mg/kg (rabbit) · Primary irritant effect: · Skin corrosion/irritation The product has an irritate-effect. Causes skin irritation. (Contd. on page 6) GB
Page 6/8
Trade name: ASODUR-LE (A-Komp.) (Contd. of page 5)
· Serious eye damage/irritation Causes serious eye irritation. · Respiratory or skin sensitisation May cause an allergic skin reaction. · Additional toxicological information: Sensitizing · CMR effects (carcinogenity, mutagenicity and toxicity for reproduction) · Germ cell mutagenicity Based on available data, the classification criteria are not met. · Carcinogenicity Based on available data, the classification criteria are not met. · Reproductive toxicity Based on available data, the classification criteria are not met. · STOT-single exposure Based on available data, the classification criteria are not met. · STOT-repeated exposure Based on available data, the classification criteria are not met. · Aspiration hazard Based on available data, the classification criteria are not met. *
SECTION 12: Ecological information · 12.1 Toxicity · Aquatic toxicity: 1675-54-3 2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane LC50/96h 2 mg/l (for) EC50 (48h) (static) 1.8 mg/l (Daphnia magna) ERC50 (static) 11 mg/l /72h (Scenedesmus capricornutum) IC50 >42.6 mg/l /18h (bacterial toxicity) 933999-84-9 Reaction products of hexane-1,6-diol with 2-(chloromethyl)oxirane (1:2) LC50/96h 30 mg/l (Leuciscus idus) EC50 (48h) 47 mg/l (Daphnia magna) 23.1 mg/l (algae toxicity) · 12.2 Persistence and degradability No further relevant information available. · 12.3 Bioaccumulative potential No further relevant information available. · 12.4 Mobility in soil No further relevant information available. · Additional ecological information: · General notes: Water hazard class 2 (Self-assessment): hazardous for water. Do not allow product to reach ground water, water bodies or sewage system. Danger to drinking water if even small quantities leak into soil. · 12.5 Results of PBT and vPvB assessment · PBT: Not applicable. · vPvB: Not applicable. · 12.6 Other adverse effects No further relevant information available.
SECTION 13: Disposal considerations · 13.1 Waste treatment methods · Recommendation Cured materials which mixed with epoxy resin can put to the houshold-rubbish, after consulting the waste diposal. Must not be disposed of together with household garbage. Do not allow product to reach sewage system. · Uncleaned packagings: · Recommendation: Empty Containers with solid product rests can be supplied for recycling. Empty Containers including fluid product rests are hazardous waste. GB
(Contd. on page 7)
Page 7/8
Trade name: ASODUR-LE (A-Komp.) (Contd. of page 6)
SECTION 14: Transport information · 14.1 UN-Number · ADR, IMDG, IATA · 14.2 UN proper shipping name · ADR
· IMDG
· IATA
UN3082 3082 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (2,2'-[(1methylethylidene)bis(4,1-phenyleneoxymethylene)] bisoxirane) ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (2,2'-[(1-methylethylidene)bis(4,1phenyleneoxymethylene)]bisoxirane), MARINE POLLUTANT ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (2,2'-[(1-methylethylidene)bis(4,1phenyleneoxymethylene)]bisoxirane)
· 14.3 Transport hazard class(es) · ADR, IMDG, IATA
· Class · Label
9 Miscellaneous dangerous substances and articles. 9
· 14.4 Packing group · ADR, IMDG, IATA
III
· 14.5 Environmental hazards: · Marine pollutant: · Special marking (ADR): · Special marking (IATA): · 14.6 Special precautions for user · Kemler Number: · EMS Number: · Stowage Category
Yes Symbol (fish and tree) Symbol (fish and tree) Symbol (fish and tree) Warning: Miscellaneous dangerous substances and articles. 90 F-A,S-F A
· 14.7 Transport in bulk according to Annex II of Marpol and the IBC Code Not applicable. · Transport/Additional information: · ADR · Limited quantities (LQ) · Excepted quantities (EQ) · Transport category · IMDG · Limited quantities (LQ) · Excepted quantities (EQ)
· UN "Model Regulation":
5L Code: E1 Maximum net quantity per inner packaging: 30 ml Maximum net quantity per outer packaging: 1000 ml 3 5L Code: E1 Maximum net quantity per inner packaging: 30 ml Maximum net quantity per outer packaging: 1000 ml UN 3082 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (2,2'-[(1(Contd. on page 8) GB
Page 8/8
Trade name: ASODUR-LE (A-Komp.) (Contd. of page 7)
·
METHYLETHYLIDENE)BIS(4,1PHENYLENEOXYMETHYLENE)]BISOXIRANE), 9, III
SECTION 15: Regulatory information · 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture · Directive 2012/18/EU · Named dangerous substances - ANNEX I None of the ingredients is listed. · Seveso category E2 Hazardous to the Aquatic Environment · Qualifying quantity (tonnes) for the application of lower-tier requirements 200 t · Qualifying quantity (tonnes) for the application of upper-tier requirements 500 t · 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
SECTION 16: Other information These data are based on our present knowledge. However, they shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. · Relevant phrases H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H411 Toxic to aquatic life with long lasting effects. H412 Harmful to aquatic life with long lasting effects. · Department issuing data specification sheet: Environment protection department. · Contact: Environment protection department. · Abbreviations and acronyms: ADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the International Carriage of Dangerous Goods by Road) IMDG: International Maritime Code for Dangerous Goods IATA: International Air Transport Association GHS: Globally Harmonised System of Classification and Labelling of Chemicals EINECS: European Inventory of Existing Commercial Chemical Substances ELINCS: European List of Notified Chemical Substances CAS: Chemical Abstracts Service (division of the American Chemical Society) LC50: Lethal concentration, 50 percent LD50: Lethal dose, 50 percent PBT: Persistent, Bioaccumulative and Toxic vPvB: very Persistent and very Bioaccumulative Skin Irrit. 2: Skin corrosion/irritation – Category 2 Eye Irrit. 2: Serious eye damage/eye irritation – Category 2 Skin Sens. 1: Skin sensitisation – Category 1 Aquatic Chronic 2: Hazardous to the aquatic environment - long-term aquatic hazard – Category 2 Aquatic Chronic 3: Hazardous to the aquatic environment - long-term aquatic hazard – Category 3
· * Data compared to the previous version altered. GB