60.0.13
Page 1/8
Safety data sheet according to UK REACH Printing date 19.12.2024
Version number 20 (replaces version 19)
Revision: 19.12.2024
SECTION 1: Identification of the substance/mixture and of the company/undertaking · 1.1 Product identifier · Trade name: BETOCRETE-CL210-WP · UFI: MYJ0-Y010-Q00H-2FKK · 1.2 Relevant identified uses of the substance or mixture and uses advised against No further relevant information available. · Application of the substance / the mixture Concrete/Mortar admixtures · 1.3 Details of the supplier of the safety data sheet · Manufacturer/Supplier: SCHOMBURG GmbH & Co. KG Aquafinstr. 2-8 D-32760 Detmold Detmold, Germany ---------------------------------------------Tel: ++49 (0)5231/953-00 Fax: ++49 (0)5231/953-123 Internet: www.schomburg.de · Informing department: Department: Environment and Safety ************************************ If you have any questions about the Environment and Safety Department, please contact our department. e-mail: SDB@schomburg.de · 1.4 Emergency telephone number: Poison centre Berlin (24 hours) German & English Tel: ++49 (0)30/30686700 *
SECTION 2: Hazards identification · 2.1 Classification of the substance or mixture · Classification according to Regulation (EC) No 1272/2008 GHS05 corrosion Skin Corr. 1A H314 Causes severe skin burns and eye damage. Eye Dam. 1 H318 Causes serious eye damage. · 2.2 Label elements · Labelling according to Regulation (EC) No 1272/2008 The product is classified and labelled according to the GB CLP regulation. · Hazard pictograms GHS05 · Signal word Danger · Hazard-determining components of labelling: potassium hydroxide · Hazard statements H314 Causes severe skin burns and eye damage. · Precautionary statements P260 Do not breathe dusts or mists. (Contd. on page 2) GB
Page 2/8
Trade name: BETOCRETE-CL210-WP (Contd. of page 1)
P280
Wear protective gloves/protective clothing/eye protection/face protection/hearing protection. P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P405 Store locked up. P501 Dispose of contents/container in accordance with local/regional/national/ international regulations. · 2.3 Other hazards · Results of PBT and vPvB assessment · PBT: Not applicable. · vPvB: Not applicable. *
SECTION 3: Composition/information on ingredients · 3.2 Mixtures · Description: aqueous salt water solution with Metal soaps · Dangerous components: CAS: 584-08-7 EINECS: 209-529-3
potassium carbonate Skin Irrit. 2, H315; Eye Irrit. 2, H319; STOT SE 3, H335
10-25%
0-<1% CAS: 1310-58-3 potassium hydroxide EINECS: 215-181-3 Met. Corr.1, H290; Skin Corr. 1A, H314; Acute Tox. 4, Index number: 019-002-00-8 H302 Specific concentration limits: Skin Corr. 1A; H314: C ≥ 5 % Skin Corr. 1B; H314: 2 % ≤ C < 5 % Skin Irrit. 2; H315: 0.5 % ≤ C < 2 % Eye Irrit. 2; H319: 0.5 % ≤ C < 2 % · Additional information For the wording of the listed hazard phrases refer to section 16. SECTION 4: First aid measures · 4.1 Description of first aid measures · General information Instantly remove any clothing soiled by the product. Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident. Personal protection for the First Aider. It is possible to choke in case of vomiting in unconsciousness. Bring unconscious persons into a stable position on side. Keep the respiratory tract free (remove dentures and vomiting). Check the pulse. In case of heart failure you have to make a cardiac massage. In case of stoppage of breathing: artificial respiration. Take up a doctor immediately! · After inhalation Supply fresh air or oxygen; call for doctor. · After skin contact If symptoms appearance, call the doctor. Instantly wash with water and soap and rinse thoroughly. Change immediately contaminated clothes. · After eye contact Rinse opened eye for several minutes under running water. Then consult doctor. · After swallowing Drink copious amounts of water and provide fresh air. Instantly call for doctor. Do not induce vomiting; instantly call for medical help. (Contd. on page 3) GB
Page 3/8
Trade name: BETOCRETE-CL210-WP (Contd. of page 2)
Show the packaging or the label to the doctor. · 4.2 Most important symptoms and effects, both acute and delayed No further relevant information available. · 4.3 Indication of any immediate medical attention and special treatment needed No further relevant information available. SECTION 5: Firefighting measures · 5.1 Extinguishing media · Suitable extinguishing agents Product is not inflammable. CO2, extinguishing powder or water jet. Fight larger fires with water jet. · 5.2 Special hazards arising from the substance or mixture Formation of poisonous gases during heating or in fires. · 5.3 Advice for firefighters · Protective equipment: Wear self-contained breathing apparatus. · Additional information Dispose of fire debris and contaminated fire fighting water in accordance with official regulations. Product is inflammable during water-component is existing. Follow the emergency-plan. Burst- and explosion-danger by increasing pressure. In case of fire chill the container with water spray. SECTION 6: Accidental release measures · 6.1 Personal precautions, protective equipment and emergency procedures Bring persons out of danger. Wear protective equipment. Keep unprotected persons away. · 6.2 Environmental precautions: Do not allow product to reach sewage system or water bodies. Inform respective authorities in case product reaches water or sewage system. · 6.3 Methods and material for containment and cleaning up: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust). Use neutralising agent. Ensure adequate ventilation. · 6.4 Reference to other sections See Section 7 for information on safe handling See Section 8 for information on personal protection equipment. See Section 13 for information on disposal. SECTION 7: Handling and storage · 7.1 Precautions for safe handling Store in cool, dry place in tightly closed containers. Ensure good ventilation/extraction at the workplace. Prevent formation of aerosols. Keep out of the reach of children · Information about protection against explosions and fires: No special measures required. · 7.2 Conditions for safe storage, including any incompatibilities · Storage · Requirements to be met by storerooms and containers: No special requirements. · Information about storage in one common storage facility: Please follow the rules of the VCI-Storage-Concept for chemicals. · Further information about storage conditions: Keep container tightly sealed. Store in a locked cabinet and out of the reach of children. (Contd. on page 4) GB
Page 4/8
Trade name: BETOCRETE-CL210-WP (Contd. of page 3)
· 7.3 Specific end use(s) No further relevant information available. SECTION 8: Exposure controls/personal protection · 8.1 Control parameters · Components with critical values that require monitoring at the workplace: 1310-58-3 potassium hydroxide (<1%) WEL Short-term value: 2 mg/m³ · Regulatory information WEL: EH40/2020 · Additional information: The lists that were valid during the compilation were used as basis. · 8.2 Exposure controls · Appropriate engineering controls It must be possible to wash the skin in the working area. Eye-wash bottle must be available. · Individual protection measures, such as personal protective equipment · General protective and hygienic measures The usual precautionary measures should be adhered to in handling the chemicals. Keep away from foodstuffs, beverages and food. Instantly remove any soiled and impregnated garments. Avoid contact with the eyes and skin. Do not eat, drink or smoke while working. Use skin protection cream for preventive skin protection. Be sure to clean skin thoroughly after work and before breaks. · Breathing equipment: In case of brief exposure or low pollution use breathing filter apparatus. In case of intensive or longer exposure use breathing apparatus that is independent of circulating air. · Hand protection Hand Protection: Nitril-rubber-latex-gloves. In case of wearing synthetic protective gloves use cotton-gloves as underwear. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation · Material of gloves Gloves made of: Natural latex, polychloroprene, nitrile rubber. (Chemical protection gloves of category 3, recognisable by the CE mark with four-digit test number). The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. · Penetration time of glove material The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed. · Not suitable are gloves made of the following materials: Leather gloves Strong gloves · Eye/face protection Suitable safety goggles in accordance with DIN EN 166. In case of splashing use protecting basket-glasses. · Body protection: Acid resistant protective clothing Alkaline resistant protective clothing Apron Protective work clothing. GB
(Contd. on page 5)
Page 5/8
Trade name: BETOCRETE-CL210-WP (Contd. of page 4)
SECTION 9: Physical and chemical properties · 9.1 Information on basic physical and chemical properties · General Information · Physical state Fluid · Colour: White · Smell: Characteristic · Odour threshold: Not determined. · Melting point/freezing point: Not determined · Boiling point or initial boiling point and boiling range >100 °C · Flammability Not applicable. · Lower and upper explosion limit · Lower: Not determined. · Upper: Not determined. · Flash point: Not applicable · Decomposition temperature: Not determined. · pH at 20 °C 12 · Viscosity: · Kinematic viscosity Not determined. · dynamic at 20 °C: 700 mPas · Solubility · Water: miscible · Partition coefficient n-octanol/water (log value) Not determined. · Steam pressure: Not determined. · Density and/or relative density · Density at 20 °C 1.06 g/cm³ · Relative density Not determined. · Vapour density Not determined. · 9.2 Other information · Appearance: · Form: Fluid · Important information on protection of health and environment, and on safety. · Self-inflammability: Product is not selfigniting. · Explosive properties: Product is not explosive. · Change in condition · Evaporation rate Not determined. · Information with regard to physical hazard classes · Explosives · Flammable gases · Aerosols · Oxidising gases · Gases under pressure · Flammable liquids · Flammable solids · Self-reactive substances and mixtures · Pyrophoric liquids · Pyrophoric solids · Self-heating substances and mixtures · Substances and mixtures, which emit flammable gases in contact with water · Oxidising liquids · Oxidising solids
Void Void Void Void Void Void Void Void Void Void Void Void Void Void (Contd. on page 6) GB
Page 6/8
Trade name: BETOCRETE-CL210-WP (Contd. of page 5)
· Organic peroxides · Corrosive to metals · Desensitised explosives
Void Void Void
SECTION 10: Stability and reactivity · 10.1 Reactivity No further relevant information available. · 10.2 Chemical stability · Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications. · 10.3 Possibility of hazardous reactions No dangerous reactions known · 10.4 Conditions to avoid No further relevant information available. · 10.5 Incompatible materials: No further relevant information available. · 10.6 Hazardous decomposition products: No dangerous decomposition products known *
SECTION 11: Toxicological information · 11.1 Information on hazard classes as defined in Regulation (EC) No 1272/2008 · Acute toxicity Based on available data, the classification criteria are not met. · LD/LC50 values that are relevant for classification: 584-08-7 potassium carbonate Oral LD50 >2,000 mg/kg (rats) (OECD 401) Dermal LD50 >2,000 mg/kg (Kan) 1310-58-3 potassium hydroxide Oral LD50 300 mg/kg (rats) · Primary irritant effect: · Skin corrosion/irritation Corrosive Causes severe skin burns and eye damage. · Serious eye damage/irritation Corrosive Causes serious eye damage. · 11.2 Information on other hazards · Endocrine disrupting properties None of the ingredients is listed. SECTION 12: Ecological information · 12.1 Toxicity · Aquatic toxicity: 1310-58-3 potassium hydroxide LC50/96h 80 mg/l (Gambusia affinis) 45.4 mg/l (rainbow trout) EC50 (48h) 40.4 mg/l (water flea (Ceriodaphnia spec) 40 mg/l (acute toxicity (invertebrates)) · 12.2 Persistence and degradability No further relevant information available. · 12.3 Bioaccumulative potential No further relevant information available. · 12.4 Mobility in soil No further relevant information available. · 12.5 Results of PBT and vPvB assessment · PBT: Not applicable. · vPvB: Not applicable. (Contd. on page 7) GB
Page 7/8
Trade name: BETOCRETE-CL210-WP (Contd. of page 6)
· 12.6 Endocrine disrupting properties The product does not contain substances with endocrine disrupting properties. · 12.7 Other adverse effects · Additional ecological information: · General notes: Water hazard class 2 (Self-assessment): hazardous for water. Do not allow product to reach ground water, water bodies or sewage system. Must not reach sewage water or drainage ditch undiluted or unneutralised. Danger to drinking water if even small quantities leak into soil. Rinse off of bigger amounts into drains or the aquatic environment may lead to increased pH-values. A high pH-value harms aquatic organisms. In the dilution of the use-level the pH-value is considerably reduced, so that after the use of the product the aqueous waste, emptied into drains, is only low water-dangerous. SECTION 13: Disposal considerations · 13.1 Waste treatment methods · Recommendation Must not be disposed of together with household garbage. Do not allow product to reach sewage system. · Uncleaned packagings: · Recommendation: Disposal must be made according to official regulations. · Recommended cleaning agent: Water, if necessary with cleaning agent. SECTION 14: Transport information · 14.1 UN number or ID number · ADR, ADN, IMDG, IATA
Void
· 14.2 UN proper shipping name · ADR, ADN, IMDG, IATA
· 14.3 Transport hazard class(es) · ADR, ADN, IMDG, IATA · Class
· 14.4 Packing group · ADR, IMDG, IATA
· 14.5 Environmental hazards: · Marine pollutant:
No
· 14.6 Special precautions for user
Not applicable.
· 14.7 Maritime transport in bulk according to IMO instruments Not applicable. · UN "Model Regulation":
SECTION 15: Regulatory information · 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture · Poisons Act · Regulated explosives precursors None of the ingredients is listed. (Contd. on page 8) GB
Page 8/8
Trade name: BETOCRETE-CL210-WP (Contd. of page 7)
· Regulated poisons None of the ingredients is listed. · Reportable explosives precursors None of the ingredients is listed. · Reportable poisons 1310-58-3 potassium hydroxide: 17% of total caustic alkalinity · Directive 2012/18/EU · Named dangerous substances - ANNEX I None of the ingredients is listed. · 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out. SECTION 16: Other information These data are based on our present knowledge. However, they shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. · Relevant phrases H290 May be corrosive to metals. H302 Harmful if swallowed. H314 Causes severe skin burns and eye damage. H315 Causes skin irritation. H319 Causes serious eye irritation. H335 May cause respiratory irritation. · Department issuing data specification sheet: Department EHS (Environment-Health-Safety) Environment protection department. · Abbreviations and acronyms: ADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the International Carriage of Dangerous Goods by Road) IMDG: International Maritime Code for Dangerous Goods IATA: International Air Transport Association GHS: Globally Harmonised System of Classification and Labelling of Chemicals EINECS: European Inventory of Existing Commercial Chemical Substances ELINCS: European List of Notified Chemical Substances CAS: Chemical Abstracts Service (division of the American Chemical Society) LC50: Lethal concentration, 50 percent LD50: Lethal dose, 50 percent PBT: Persistent, Bioaccumulative and Toxic vPvB: very Persistent and very Bioaccumulative Met. Corr.1: Corrosive to metals – Category 1 Acute Tox. 4: Acute toxicity – Category 4 Skin Corr. 1A: Skin corrosion/irritation – Category 1A Skin Irrit. 2: Skin corrosion/irritation – Category 2 Eye Dam. 1: Serious eye damage/eye irritation – Category 1 Eye Irrit. 2: Serious eye damage/eye irritation – Category 2 STOT SE 3: Specific target organ toxicity (single exposure) – Category 3
· * Data compared to the previous version altered. GB