SANIFIN_65998_ENGLISH.pdf
3 Pages
1.27 MB
Download
<h1>SANIFIN_65998_ENGLISH.pdf</h1> <p>Technical data sheet <br />SANIFIN-EKB <br />Waterproofing and de-coupling membrane</p> <p>Material number Length</p> <p>Width, article</p> <p>Material thickness Contents</p> <p>Unit of quantity</p> <p>Packaging</p> <p>Colour</p> <p>205902001</p> <p>100 cm</p> <p>approx. 1.8 mm</p> <p>ST</p> <p>Roll</p> <p>White</p> <p>15 m</p> <p>1</p> <p>Product features <br />Decouples tile and slab coverings from the substrate <br />Crack bridging <br />Reduces impact sound <br />Water-tight</p> <p>Advantages <br />Tested system product <br />Optimum laying properties <br />easy to cut</p> <p>Areas of application <br />as decoupling under tile and slab coverings for the decoupling categories EK-H, EK-G, EK-W and EK-M <br />As bonded waterproofing for water impact class W0-I to W2-I in accordance with DIN 18534 <br />For floor <br />For interior</p> <p>Existing test certificates <br />General building inspectorate test certificate for creating a seal in combination with tile and slab coverings <br />Impact sound reduction test</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />1/3</p> <p>07/02/2025</p> <p>Technical data sheet <br />SANIFIN-EKB <br />Technical Data <br />Material properties <br />Product components <br />Base material <br />Crack bridging DIN EN 1062-7 <br />Vapour diffusion behaviour <br />Permissible traffic load</p> <p>Roll goods <br />Composite material: Fleece-membrane-fleece <br />Passed <br />Vapour diffusion behaviour <br />10 kN/m² (distributed load)</p> <p>Application <br />Substrate/application temperature <br />Consumption</p> <p>approx. 5 - 25 °C <br />approx. 1 m² per m²</p> <p>System components in accordance with AbP AIV <br />Primer <br />Waterproofing</p> <p>Tile adhesive</p> <p>ASO-Unigrund <br />AQUAFIN-1K-PREMIUM <br />AQUAFIN-RS300 <br />AQUAFIN-2K/M-PLUS <br />MONOFLEX-XL <br />MONOFLEX <br />MONOFLEX-FB <br />MONOFLEX-fast <br />SOLOFLEX <br />AK7P <br />CARO-FK-FLEX</p> <p>Suitable substrate <br />Wood materials <br />Dry screeds <br />Raised floors <br />Tile bearing elements <br />Firmly adhering tiled finishes <br />Concrete, cement screed (CT), floor levelling compounds, calcium sulphate screeds (CA, CAF), mastic asphalt screeds (AS), magnesia <br />screeds (MA)</p> <p>Preparing the substrate <br />Requirement for substrate <br />1. <br />2. <br />3. <br />4. <br />5. <br />6.</p> <p>Dry <br />Load-bearing <br />Even <br />Sealed in the surface <br />Free from negative pressing water <br />Free of adhesion inhibiting substances</p> <p>Preparing the surface <br />1. Check the substrate and determine the residual moisture content using the CM method. <br />2. Remove impurities, adhesion-reducing substances and binder accumulations/laitance layers. <br />3. Prime absorbent substrates with ASO-Unigrund-GE, ASO-Unigrund-K or ASO-Unigrund-PLUS.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />2/3</p> <p>07/02/2025</p> <p>Technical data sheet <br />SANIFIN-EKB <br />Moisture content of the CM measurement</p> <p>Application <br />Structure in the water exposure classes W0-I to W2-I in accordance with DIN 18534-5 and ZDB leaflet [*1] <br />1. <br />2. <br />3. <br />4. <br />5.</p> <p>Prepare the substrate according to the substrate requirements. <br />Cut SANIFIN-EKB to the appropriate size. <br />Apply SCHOMBURG tile adhesive to the substrate using a notched trowel (6 mm). <br />Lay the sheet into the fresh adhesive bed with the red side facing upwards. <br />Press the strip into the adhesive bed using a flat trowel or roller so that there are no voids and no wrinkles. Ensure that the bedding and crosslinking covers the whole area from the fleece to the adhesive. <br />6. Seal and smooth over butt joints at intersecting sheets, rising components (e.g. walls) and penetrations with sealing tape and sealant. (Technical <br />data > System components according to abP AiV) <br />7. Tiles and slabs can be laid as soon as the SCHOMBURG tile adhesive / waterproofing material can be walked on according to the <br />corresponding TM.</p> <p>Application <br />1. <br />2. <br />3. <br />4. <br />5.</p> <p>Prepare the substrate according to the substrate requirements. <br />Cut SANIFIN-EKB to size. <br />Apply SCHOMBURG tile adhesive to the substrate using a notched trowel (6 mm). <br />Lay the sheet into the fresh adhesive bed with the red side facing upwards. <br />Press the strip into the adhesive bed using a flat trowel or roller so that there are no voids and no wrinkles. Ensure that the bedding and crosslinking covers the whole area from the fleece to the adhesive. <br />6. Tiles and slabs can be laid as soon as the SCHOMBURG tile adhesive / waterproofing material can be walked on according to the <br />corresponding TM.</p> <p>Notes <br />Direct contact with metals such as copper, zinc, and aluminium must be avoided by means of a pore sealed primer. A pore-sealed primer is <br />produced via 2 application steps using ASODUR-GBM (see technical data sheet). <br />Border, field and movement joints should be carried over to the designated location; suitable means such as RD-SK50 edging strips should <br />be used to detach them! Crack control joints must be closed with a force fit or secured against height differences. <br />Observe the technical data sheets of the products mentioned and the laying instructions from the surface coating’s manufacturer! <br />Protect surfaces that are not to be treated from the effects of the system adhesive or the bonded waterproof systems!</p> <p>Relevant regulations <br />Planning, inspection of substrates and building site circumstances, laying, grouting and subsequent <br />care of the work must be done in accordance with the relevant DIN standards and recognised rules of <br />technology (e.g. the ZDB sheets of the Zentralverband Deutsches Baugewerbe e.V.) in the latest <br />version.</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you <br />in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description <br />does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />3/3</p> <p>07/02/2025</p>
