AQUAFIN-Primer_203901_Englisch.pdf
3 Pages
906 KB
Download
<h1>AQUAFIN-Primer_203901_Englisch.pdf</h1> <p>Technical data sheet <br />AQUAFIN®-Primer <br />Safety primer for building waterproofing and renovation</p> <p>Material number</p> <p>Contents</p> <p>Unit of quantity</p> <p>Colour</p> <p>203901002</p> <p>5</p> <p>L</p> <p>whitish, slightly cloudy</p> <p>203901003</p> <p>10</p> <p>L</p> <p>whitish, slightly cloudy</p> <p>203901004</p> <p>1</p> <p>L</p> <p>whitish, slightly cloudy</p> <p>Product features <br />Dispersion silicate primer with improved adhesion properties <br />Ready to use <br />Rapid drying <br />Substrate consolidating <br />Reduces the capillary absorbency on the building material surface. <br />Dust-binding <br />Solvent free</p> <p>Advantages <br />Improves the bonding of subsequent waterproofing and mortar layers <br />Can be applied directly - without mixing <br />Can be applied by brush, roller and spray <br />Can be quickly overcoated - after approx. 30 minutes (matt damp) <br />Water-repellent and improved adhesion <br />Very low-emission - EMICODE® EC 1PLUS</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />1/3</p> <p>17/03/2025</p> <p>Technical data sheet <br />AQUAFIN®-Primer <br />Areas of application <br />As a primer on weak and highly absorbent substrates <br />For substrate preparation for waterproofing with flexible polymer modified thick layer coating (FPD) such as AQUAFIN-RB400 and <br />cementitious waterproofing slurry (MDS) such as AQUAFIN-1K or ASOCRET-M30 multi-mortar <br />Suitable for all cementitious substrates, e.g. concrete and masonry work. <br />For dry and matt damp substrates <br />For walls, ceilings, floors <br />For interior and exterior use <br />System components for waterproofing <br />System components of THERMOPAL restoration plastering systems</p> <p>Existing test certificates <br />EMICODE licence <br />French cert. VOC <br />Belgian cert. VOC</p> <p>Technical Data <br />Material properties <br />Product components <br />Base material <br />Consistency <br />Density (spec. weight)</p> <p>Ready to use <br />Silicate dispersion <br />Liquid <br />approx. 1 g/cm³</p> <p>Application <br />Substrate/application temperature <br />Consumption <br />Overcoat after</p> <p>approx. 5 - 30 °C <br />approx. 200.00 - 250.00 g / m² <br />approx. 30 minutes</p> <p>System components for building waterproofing <br />Waterproofing</p> <p>Mortar / restoration plaster</p> <p>AQUAFIN-RB400 <br />AQUAFIN-2K/M-PLUS <br />AQUAFIN-1K <br />COMBIDIC-2K-CLASSIC <br />COMBIDIC-2K-PREMIUM <br />COMBIDIC-1K <br />COMBIDIC-1K-S <br />ASOCRET-M30 <br />THERMOPAL restoration plaster</p> <p>Processing equipment <br />Aids/tools <br />Colour roller <br />Brush <br />Spray equipment <br />Brush</p> <p>Suitable substrate <br />Concrete <br />Brick and sand-lime brickwork <br />Aerated concrete <br />Cement-based screed (CT) <br />Cement plaster <br />Lime-cement plaster <br />Cement and fibre cement boards</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />2/3</p> <p>17/03/2025</p> <p>Technical data sheet <br />AQUAFIN®-Primer <br />Preparing the substrate <br />Requirement for substrate <br />1. Load-bearing <br />2. dry to matt damp <br />3. Clean <br />4. Absorbent <br />5. Free of cracks <br />6. Free of adhesion inhibiting substances</p> <p>Preparing the surface <br />1. Clean the sole overhang. <br />2. Totally remove the laitance layers. <br />3. Protect/cover adjacent surfaces and building components from splashes or spray mist.</p> <p>Application <br />Application <br />1. Apply AQUAFIN®-Primer with suitable tool. <br />2. Oversaturation or forming puddles must be avoided. <br />3. The surface can be reworked (after approx. 30 minutes) when the primer has dried to a matt damp finish. <br />4. Longer drying times do not have a negative effect on bonding. <br />5. If necessary, repeat application.</p> <p>Cleaning tools <br />Rinse tools with water immediately after use.</p> <p>Storage conditions <br />Storage <br />Store in a frost-free, cool and dry place. At min. 5 - 40 °C for 12 months in the original canister. Promptly use opened container.</p> <p>Emission behaviour / building certification systems <br />Very low emissions in accordance with GEV-EMICODE, which normally results in positive evaluations within the scope of building <br />certification systems in accordance with DGNB, LEED, BREEAM, HQE. <br />Suitable for indoor use in accordance with the French VOC Directive and Belgian Royal Decree C-2014/24239.</p> <p>Notes <br />Protect surfaces that are not to be treated from the effects of AQUAFIN®-Primer! <br />Clean splashes immediately with water. Glass, metals, window frames etc. can be attacked by AQUAFIN®-Primer.</p> <p>Relevant regulations <br />The recognised standards of construction engineering, the relevant guidelines and current regulations <br />must be observed. <br />Observe applicable safety data sheet! <br />GISCODE: D1</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you <br />in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description <br />does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />3/3</p> <p>17/03/2025</p>
