ASO-Dichtecke-A_206133_Englisch.pdf
3 Pages
230 KB
Download
<h1>ASO-Dichtecke-A_206133_Englisch.pdf</h1> <p>Technical Datasheet <br />ASO®-Dichtecke-A <br />Joint tape corner (external) for bonded waterproofing</p> <p>Material number</p> <p>Length</p> <p>Width, article</p> <p>Material strength</p> <p>Packaging</p> <p>Colour</p> <p>206133001</p> <p>12 cm</p> <p>6 cm</p> <p>approx. 0.5 mm</p> <p>piece</p> <p>Grey with <br />SCHOMBURG logo</p> <p>Product features <br />Fleece-laminated external corner <br />Flexible and stretchy <br />Crack bridging</p> <p>Advantages <br />Tested system product <br />High bonding to cementitious waterproofing slurry or polymer dispersions thanks to fleece-laminated surface</p> <p>Areas of use/bonded waterproofing <br />as system components for the Schomburg joint tape system for reliable waterproofing and integration of expansion, movement and edge <br />connecting joints in bonded waterproofing <br />As a system component for bonded waterproofing for water impact class W0-I to W3-I in accordance with DIN 18534</p> <p>Technical Data <br />Material properties <br />Product components <br />Base material <br />Burst pressure <br />Reaction to fire in accordance with DIN EN 4102 <br />Sealing against pressing water until <br />Sd value in accordance with DIN EN 1931 <br />Temperature resistance <br />Vapour diffusion behaviour</p> <p>Piece goods <br />TPE <br />Composite material: Fleece-membrane-fleece <br />≥ 1.5 bar <br />B2 <br />1.5 bar <br />> 14 m ± 7 m <br />- 30 + 90 °C <br />Vapour diffusion-inhibiting</p> <p>Application <br />Consumption</p> <p>1 pc per application</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />1/3</p> <p>29/06/2023</p> <p>Technical Datasheet <br />ASO®-Dichtecke-A <br />Application technology <br />Aids/tools <br />Serrated or layer-thickness trowel <br />Flat trowel <br />Brush <br />Pressure roller <br />Scissors/knife</p> <p>Suitable substrate <br />Dry screeds <br />Raised floors <br />Tile bearing elements <br />Firmly adhering tiled finishes <br />Concrete, cement screed (CT), floor levelling compounds, calcium sulphate screeds (CA, CAF), mastic asphalt screeds (AS), magnesia <br />screeds (MA) <br />Cement-based plaster, gypsum plaster, cement-lime plaster, lightweight plaster <br />Bonded waterproofing; the suitability of the substrate must be checked and observed, taking into account the planned water impact class of <br />DIN 18534 and DIN 18531.</p> <p>Substrate preparation <br />Requirement for substrate <br />1. <br />2. <br />3. <br />4. <br />5. <br />6. <br />7.</p> <p>Dry <br />Load-bearing <br />Even <br />Sealed in the surface <br />Free of cracks <br />Free from negative pressing water <br />Free of adhesion inhibiting substances</p> <p>Measures for substrate preparation <br />Instructions for substrate preparation can be found in the technical data sheet of the selected sealing material.</p> <p>Usage <br />Application <br />1. Apply the waterproofing material to both sides of the joint or wall transition to be bridged, at least 2 cm wider than the joint sealing tape that is <br />used (e.g. using a 4–6 mm notched trowel). <br />2. Lay ASO®-Dichtecke-A in the fresh layer. <br />3. For structural movement joints, ASO®-Dichtecke-A is inserted into the joint and the fresh layer in the form of a loop. <br />4. For structural movement joints/movement joints, the pre-formed pieces are inserted into the joint and the fresh layer in the form of a loop. <br />5. Press in the joint sealing tape in the waterproofing layer meticulously without voids or wrinkles, using a flat trowel or pressure roller. <br />6. Joint-tape edges or connections to pre-formed pieces are applied with an overlap of at least 5 cm. <br />7. Bond joint-tape edges or connections with the waterproofing material without wrinkles, covering the whole area, and overcoat after. <br />8. If a liquid waterproofing membrane is used, apply the second layer of waterproofing membrane on top of the connecting waterproofing tape.</p> <p>Storage conditions <br />Storage <br />Cool, dry, protected from sunlight. Min. 24 months in the original container.</p> <p>Disposal <br />Product leftovers can be disposed of in household waste.</p> <p>Emission behaviour / building certification systems <br />Very low emissions in accordance with GEV-EMICODE, which normally results in positive evaluations within the scope of building <br />certification systems in accordance with DGNB, LEED, BREEAM, HQE. <br />Maximum quality level 4, line 8 in accordance with DGNB criteria "ENV 1.2 Risks to the local environment".</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />2/3</p> <p>29/06/2023</p> <p>Technical Datasheet <br />ASO®-Dichtecke-A <br />Notes <br />Remove adhesive strips from any existing interfaces of the joint tape roll. Establish the connection area overlapping. <br />Joints that are secured with ASO®-Dichtecke-A must be adequately protected against mechanical damage! <br />ASO®-Dichtecke-A may not be glued or overcoated afterwards with products containing solvents. <br />Border, field, structural movement joints and movement joints should be carried over to or installed at the designated location; suitable means <br />(e.g. edge strips) should be used to detach them!</p> <p>Planning, inspection of substrates and building site circumstances, laying, grouting and subsequent <br />care of the work must be done in accordance with the relevant DIN standards and recognised rules of <br />technology (e.g. the ZDB sheets of the Zentralverband Deutsches Baugewerbe e.V.) in the latest <br />version.</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you <br />in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description <br />does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />3/3</p> <p>29/06/2023</p>
