ASOLIN-WS_201246_Englisch.pdf
3 Pages
1.06 MB
Download
<h1>ASOLIN-WS_201246_Englisch.pdf</h1> <p>Technical data sheet <br />ASOLIN-WS <br />Hydrophobic facade impregnation</p> <p>Material number</p> <p>Contents</p> <p>Unit of quantity</p> <p>Packaging</p> <p>Colour</p> <p>201246002</p> <p>25</p> <p>L</p> <p>Canister</p> <p>clear</p> <p>201246004</p> <p>5</p> <p>L</p> <p>Canister</p> <p>clear</p> <p>Product features <br />Ready to use <br />contains solvents <br />hydrophobic <br />Alkali and UV-resistant <br />Water-repellent</p> <p>Advantages <br />Highly penetrating <br />Non film forming <br />Also suitable for matt damp substrates <br />Dries out without sticking</p> <p>Areas of application <br />For impregnating cementitious building products in exterior area <br />For vertical or steeply sloping surfaces</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />1/3</p> <p>30/01/2025</p> <p>Technical data sheet <br />ASOLIN-WS <br />Technical Data <br />Material properties <br />Product components <br />Base material <br />Consistency <br />Density (spec. weight)</p> <p>Ready to use <br />Oligomeric siloxane <br />liquid, not dilutable <br />approx. 0.78 g/cm³</p> <p>Application <br />Substrate/application temperature <br />Consumption</p> <p>approx. 5 - 30 °C <br />approx. 500.00 - 1000.00 ml/m²</p> <p>Material rate <br />Material consumption rate according to the area of application</p> <p>Processing equipment <br />Aids/tools <br />Pressure spray system <br />Colour roller <br />Primer brush <br />Brush</p> <p>Manual processing <br />Sprayable with pressure spray device <br />Can be painted on with paint rollers <br />Applicable with a brush</p> <p>Suitable substrate <br />Concrete <br />Masonry work <br />Mineral colours <br />Natural stone <br />Cement plaster <br />Brick and sand-lime brickwork</p> <p>Preparing the substrate <br />Requirement for substrate <br />1. <br />2. <br />3. <br />4.</p> <p>Free of adhesion inhibiting substances <br />Pore open <br />Load-bearing <br />dry to matt damp</p> <p>Measures for substrate preparation <br />1. Preliminary tests are essential for natural stone. <br />2. It must be ensured that no water or substances dissolved in it get behind the hydrophobised zone.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />2/3</p> <p>30/01/2025</p> <p>Technical data sheet <br />ASOLIN-WS <br />Application <br />Application <br />1. Apply undiluted ASOLIN-WS by spraying, brushing or flooding onto the prepared substrate in at least two application steps, wet on wet. <br />2. To reduce application marks, work from the bottom up. <br />3. For highly absorbent substrates, apply ASOLIN-WS until saturated.</p> <p>Storage conditions <br />Storage <br />Cool, dry, protected from sunlight. Min. 24 months in the original canister. Promptly use opened container.</p> <p>Disposal <br />Must not be disposed of in household waste. Do not allow to enter the sewer system.</p> <p>Notes <br />Protect surfaces that are not to be treated from the effects of ASOLIN-WS. Adjacent surfaces and building components that should not come <br />into contact with the material, e.g. windows, doors, glass surfaces as well as plants, should be covered and protected accordingly. <br />Colour intensification of the building material to be treated is possible; therefore carry out preliminary tests. <br />Protect freshly impregnated surfaces from rain until dry. <br />Do not apply on solvent-sensitive building materials such as bitumen, polystyrene, etc. <br />Do not apply on substrates with salts that are harmful to the building. <br />Do not use in interior area.</p> <p>Observe applicable safety data sheet!</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you <br />in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description <br />does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />3/3</p> <p>30/01/2025</p>
