Technical Datasheet ESCOSIL-2000-ST Natural stone silicone
Material number
Contents
Packaging
Colour
205592001
310 ml
Cartridge
White
205592006
pergamon
205592011
beige
205592012
nut brown
205592015
silver grey
205592016
Grey
205592017
titanium grey
205592019
Black
205592020
jasmine
205592021
caramel
205592022
Jura beige
205592023
brown
205592024
Medium grey
205592025
graphite
205592026
sand grey
205592027
Bahama beige
Product features Natural stone silicone - contains fungicide Oxime cure water resistant Resistant to chlorine and chemicals Skin forms after ca. 10 minutes Hardening of approx. 2 - 3 mm on the 1st day Total permissible deformation: max. 25 %
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 1/21
27/07/2023
Technical Datasheet ESCOSIL-2000-ST Advantages Compatible with natural stone Non slump Convenient compaction properties Anti-fungal effect Easy to smooth
Areas of application For sealing expansion, movement and connecting joints in tiled finishes To produce movement joints in sanitary applications, damp and wet areas For walls and floors For interior and exterior use
Existing test certificates EMICODE licence
Technical Data Material properties Product components Base material Consistency Reaction to fire in accordance with Directive 96/603/EC Curve E module (DIN 53452) Elongation at break (ISO 37) UV-resistant Tensile strength (ISO 37) Permissible movement accommodation Classification of the reaction to fire in accordance with DIN EN 13501-1
1 component system Neutral curing silicone jointing compound Paste E approx. 0.48 N/mm² approx. 600 % true approx. 1.4 N/mm² max. 25 % E
Application Substrate temperature Pot life Hardening process per 24 hours Foot traffic after Application temperature Hardening time / full resilience Skin formation time
from 5 °C to 35 °C approx. 10 minutes min. 2 mm approx. 24 hours from 5 °C to 35 °C approx. 24 - 48 hours approx. 10 minutes
Material consumption Material consumption rate according to the area of application
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 2/21
Technical Datasheet ESCOSIL-2000-ST Application technology Aids/tools Smooth wood Flat trowel Craft knife Smoothing agent
Manual processing Can be smoothed with a smoothing tool
Suitable substrate Glass
Substrate preparation Requirement for substrate 1. Clean 2. Dry 3. Free of adhesion inhibiting substances
Priming table
Preparing the details Clean the joint edges on sandstone thoroughly by brushing off.
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 3/21
Technical Datasheet ESCOSIL-2000-ST Preparing the surface 1. No moisture may enter during hardening. This also applies to the edges and the joint edge. 2. Pre-treat the joint edges with a suitable primer (e.g. OTTO Primer 1225) on rough, porous, cementitious substrates (e.g. concrete, aerated concrete, eternit, plaster and masonry work). 3. For improved adhesion on natural stones and metal (e.g. aluminium, hot-dip galvanisation, etc.), prime the joint edges with OTTO Primer 1216 /1218. 4. Pre-treat natural stones in intermittently wet rooms with OTTO Primer 1216/1218. 5. Pre-treat sandstone with OTTO Primer 1102. 6. Carry out performance tests on the building on coated and plastic surfaces. 7. Allow the primer to dry.
Usage Application 1. When filling with ESCOSIL-2000-ST, the general standards for jointing technology are essential. 2. Smooth the surface of the applied sealing compound using a smoothing agent and suitable tools before it can form a skin. Push the material into the joints and press onto the contact surfaces. 3. We recommend using OTTO marble silicone smoothing agent. Conventional smoothing agents (washing up liquid) can leave smoothing agent stains.
Cleaning tools Immediately after use, clean tools with ASO-R001.
Storage conditions Storage Frost-free. cool and dry. 24 months in the original container. Promptly use opened container.
Disposal Product leftovers can be disposed of in accordance with disposal code AVV 08 04 09.
Notes Protect surfaces that are not to be treated from the effects of ESCOSIL-2000-ST! Avoid contamination on the skin and remove with soap and water if necessary. Unhardened sealing compound ESCOSIL-2000-ST must not get into eyes and/or mucous membranes. Rise the eyes immediately with a large amount of water and consult a doctor. Avoid extended and repeated skin contact. When using the primer, comply with all precautions for handling paints / solvents that contain solvents. Contains a mixture of butanone oxime silanes and butanone oxime. May cause allergic reactions. This must not be inhaled continuously, as damage to health cannot be ruled out. Oil, tar and bitumen containing backing strips as well as materials based on natural rubber, chloroprene or EPDM are not suitable. The first 2 digits of the lot number imprint correspond to the month of bottling, and the third and fourth digits to the year of bottling.
The recognised standards of construction engineering, the relevant guidelines and current regulations must be observed. Extract of essential regulations Observe the current IVD data sheets [*3] "Movement joints in cladding and coverings made of tiles and boards"
Observe applicable safety data sheet!
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 4/21
Technical Datasheet ESCOSIL-2000-ST Annotations Conformity / Declaration / Verification
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 5/21
Technical Datasheet ESCOSIL-2000-ST Colours Bahama beige White titanium grey silver grey sand grey pergamon nut brown Medium grey Jura beige jasmine Grey graphite caramel brown beige Black
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 6/21
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 7/21
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 8/21
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 9/21
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 10/21
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 11/21
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 12/21
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 13/21
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 14/21
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 15/21
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 16/21
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 17/21
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 18/21
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 19/21
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 20/21
The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 21/21