Folder_SCHOMBURG_THERMOPAL-ULTRA-white_EN_5124.pdf
6 Pages
1.43 MB
Download
<h1>Folder_SCHOMBURG_THERMOPAL-ULTRA-white_EN_5124.pdf</h1> <p>SCHOMBURG <br />Problems Solved.</p> <p>THERMOPAL® <br />ULTRA-white <br />Faster, whiter and WTA-certified rapid <br />renovation plaster for damp and saltdamaged masonry.</p> <p>schomburg.com</p> <p>Restoration plaster for <br />the highest surface quality <br />against moisture damage. <br />THERMOPAL-ULTRA-white is a white restoration plaster <br />that is suitable for the reliable renovation of masonry <br />surfaces exposed to salt and moisture. <br />The WTA-certified restoration plaster is permeable to <br />water vapour and supports the drying out of damp <br />masonry. Due to its high volume of entrained air, harmful <br />salts are retained in the renovation plaster and the plaster <br />surface remains free of salt efflorescence. The controlled <br />material setting makes the workflow calculable. Even <br />under critical environmental conditions, refurbishment <br />measures can be performed quickly.</p> <p>Technical data <br />Aggregate</p> <p>< 2.0 mm</p> <p>Colour</p> <p>White</p> <p>Water demand</p> <p>approx. 7.0– 7.5 l/m²</p> <p>Consumption</p> <p>approx. 9.0 kg/m² per cm layer thickness</p> <p>Pot life</p> <p>approx. 45 minutes</p> <p>Packaging</p> <p>25 kg foil bag</p> <p>Advantages for the user <br />White restoration plaster surface <br />Directly usable surfaces <br />Rapid, reactive binding (even with under critical site conditions)</p> <p>THERMOPAL®-ULTRA-white</p> <p>For rapid restoration work with the best <br />surface quality. <br />Areas of application <br />· Restoring living spaces <br />· Private areas <br />· High quality usable areas <br />· Directly usable surfaces <br />· High salt load in the masonry work <br />· Damp damage due to condensation <br />· For building sites under time pressure <br />· Base areas <br />· Interior and exterior areas <br />Properties <br />· White restoration plaster surface <br />· Climate-regulating <br />· Low material rate <br />· High volume of entrained air <br />· Sulphate resistant <br />· Rapid, reactive bonding behaviour <br />· Vapour permeable <br />· Keeps the surface dry <br />· Extremely low shrinkage</p> <p>schomburg.com</p> <p>The perfect system solution.</p> <p>THERMOPAL-GP11 <br />WTA priming plaster <br />THERMOPAL-GP11 serves as a priming and levelling <br />plaster for uneven surfaces indoors and outdoors. <br />In the case of heavy salt exposure, THERMOPAL-GP11 <br />serves as an extra salt reservoir. <br />• Highly sulphate resistant <br />• Vapour permeable <br />• WTA-certified</p> <p>THERMOPAL-SP <br />WTA preparatory renovating <br />sprayed mortar <br />THERMOPAL-SP creates bonding between the substrate and <br />the plaster system. The application is done in the form of a grid <br />with a degree of coverage ≤ 50%. When used in combination <br />with mineral waterproofing slurries, THERMOPAL-SP is applied <br />over the entire surface with 100% coverage. <br />• very good bonding for <br />cementitious substrates <br />• very good bonding for <br />subsequent plaster layers <br />• WTA-certified</p> <p>1D1024000 03/24 RiR/JD/Tet/LaA</p> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstraße 2–8 <br />D-32760 Detmold (Germany) <br />Telephone +49-5231-953-00 <br />Fax <br />+49-5231-953-333 <br />www.schomburg.com</p> <p>Subject to change without prior notification. The valid issue of the corresponding technical bulletin legally applies.</p>
