ASOFLEX-AKB-floor_Leistungserklärung_29.05.19_GB.pdf
2 Pages
240 Ko
Download
<h1>ASOFLEX-AKB-floor_Leistungserklärung_29.05.19_GB.pdf</h1> <p>Declaration of Performance <br />according Annex III of the Regulation (EU) No 305/2011 <br />amended by Commissions delegated Regulation (EU) No 574/2014</p> <p>for the product</p> <p>ASOFLEX-AKB-floor <br />203554 <br />1.</p> <p>Unique identification code of the product type:</p> <p>EN 14891 CM</p> <p>2.</p> <p>Intended use:</p> <p>Liquid applied cement based <br />waterproofing product for use under ceramic <br />tiles in exterior areas</p> <p>3. Manufacturer :</p> <p>Schomburg GmbH & Co. KG <br />Aquafinstrasse 2-8 <br />32760 Detmold</p> <p>4. System or systems of assessment and <br />verification of constancy of performance <br />of the construction product as:</p> <p>System 3 <br />System 4</p> <p>5. Harmonised standard :</p> <p>EN 14891:2012</p> <p>6. Notified test laboratory:</p> <p>KIWA GmbH Polymer Institut <br />Notified Body No. : 1119</p> <p>7. Declared performance :</p> <p>Essential characteristic</p> <p>Performance</p> <p>Initial tensile adhesion strength <br />Tensile adhesion strength after water contact <br />Tensile adhesion strength after heat ageing <br />Tensile adhesion strength after freeze-thaw <br />cycles <br />Tensile adhesion strength after contact with lime <br />water <br />Waterproofing <br />Crack bridging ability <br />Crack bridging ability at low temperatures <br />Release of dangerous substances</p> <p>≥ 0,5 N/mm2 <br />≥ 0,5 N/mm2 <br />≥ 0,5 N/mm2 <br />≥ 0,5 N/mm2</p> <p>System of <br />assessment and <br />verification of <br />constancy of <br />performance <br />System 4 <br />System 4 <br />System 4 <br />System 4</p> <p>≥ 0,5 N/mm2</p> <p>System 4</p> <p>no penetration <br />≥ 0,75 mm <br />≥ 0,75 mm <br />NPD</p> <p>System 3 <br />System 4 <br />System 4 <br />NPD</p> <p>Harmonised <br />technical <br />specification</p> <p>14891:2012</p> <p>The performance of the product identified above is in conformity with the set of declared <br />performance/s. This declaration of performance is issued, in accordance with Regulation (EU) No <br />305/2011, under the sole responsibility of the manufacturer identified above. <br />Signed for and on behalf of the manufacturer by: <br />Wilhelm Kreiling-Dreyer, technician <br />(name and function)</p> <p>Detmold, 29.05.2019</p> <p>This declaration of performance was created electronically. It is valid without manual <br />signature.</p> <p>The current material safety data sheet and technical data sheet is downloadable under <br />http://www.schomburg-ics.de/en/Materials_safety_Data_Sheet_MSDS-datenblaetter.html <br />or <br />http://www.schomburg-ics.de/en/Technical_Data_Sheet-datenblaetter.html</p>
