Declaration of Performance according Annex III of the Regulation (EU) No 305/2011 amended by Commissions delegated Regulation (EU) No 574/2014
for the product
SANIFLEX-EU 204990 1.
Unique identification code of the product type:
ETAG 022-1
2. Intended use:
Watertight covering kits for wet room floors and or walls
3. Manufacturer :
Schomburg GmbH & Co. KG Aquafinstrasse 2-8 32760 Detmold
4. Authorized representative :
not relevant
5. System or systems of assessment and verification of constancy of performance of the construction product as:
6. European Technical assessment :
7. Notified test laboratory:
System 2+ System 3 for reaction to fire
ETA-17/0469
The notified testing laboratory KIWA Polymer Institut, identification number 0799 performed the determination of the producttype on the basis of type testing under system 2 +
8. Declared performance : Essential characteristics
Performance
Reaction to fire Class E Contain dangerous substances Substances classified The kit does not contain these b) as EU-cat. Carc. dangerous substances. a) 1A/1B Substances classified as EU-cat. Muta. 1A/1B. a) 1A/1B Substances classified as The kit does not contain these EU-cat. Acute Tox. 1.2 dangerous sub-stances expect: b) c): and/or 3; substances classified as EU-cat. Substance 1 classified as EURepr. 1A/1B; substances cat Acute Tox. 3 (H301, H311) classified as EU-cat. STOT SE 1 and/or STOT and classified as EU-cat. Acute Tox. 2 (H330). RE 1 Substance 2 classified as EUcat Acute Tox. 3 (H301, H331) Substance 3 classified as EUcat Acute Tox. (H330) and STOT RE 1 (H372) Water vapor permeability Mit ASO-UNIGRUND-D, sd ca,. 44 m Mit ASO-UNIGRUND-GE/K sd ca,. 9 m Mit ASO-UNIGRUND-S, sd ca,.6,8 m m Watertigthness in watertight accordance to EN 13967 Crack bridging ability Category 1: 0,4 ,mm Bond strength >0,5 mPa Joint Bridging ability Catergory : watertight Watertightness around Category 2: watertight penetrations Resistance to water Category 2: > 5 mPa Resistance to Category 2: temperature temperature resistant Resistance to Alkali Category 2: Alkali resistant Applicability applicable Thickness Not less than 0,5 mm a) b) c)
System of assessment and verification of constancy of performance
Harmonised technical specification
2+ ETAG 022-1
In accordance with Regulation (EC) No 1272/2008 Assessment based on the detailed manufacturer`s statements At the time of assessment the biocidal products used are marketable
The performance of the product identified in points 1 and 2 is in conformity with the declared performance in point 8. This declaration of performance is issued under the sole responsibility of the manufacturer identified in point 3.
Signed for and on behalf of the manufacturer by: Wilhelm Kreiling-Dreyer, technician (name and function)
Detmold, 17.01.2018
This declaration of performance was created electronically. It is valid without manual signature.
The current material safety data sheet and technical data sheet is downloadable under http://www.schomburg-ics.de/en/Materials_safety_Data_Sheet_MSDS-datenblaetter.html or http://www.schomburg-ics.de/en/Technical_Data_Sheet-datenblaetter.html