23 Additional technical information_Integrating components within the waterproof membrane – flange preparation EN 1125.pdf
1 页码
556.8 KB
Download
<h1>23 Additional technical information_Integrating components within the waterproof membrane – flange preparation EN 1125.pdf</h1> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D-32760 Detmold (Germany) <br />phone + 49-5231- 953-00 <br />fax <br />+ 49-5231- 953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>Additional Technical Information No. 23</p> <p>Integrating components within the waterproof <br />membrane – flange preparation <br />Flange material type</p> <p>AQUAFIN®-RB400 <br />ASOFLEX-AKB-Wall</p> <p>degrease</p> <p>degrease</p> <p>AQUAFIN®-2K/M-PLUS</p> <p>degrease</p> <p>AQUAFIN®-RS300</p> <p>Waterproofing <br />material</p> <p>Substrate <br />preparation</p> <p>Stainless <br />steel</p> <p>Bronze/ <br />Gunmetal</p> <p>Steel</p> <p>Aluminium</p> <p>Zinc</p> <p>Copper</p> <p>abrade</p> <p>○</p> <p>○</p> <p>○</p> <p>○</p> <p>○</p> <p>○</p> <p>prime</p> <p>×</p> <p>×</p> <p>or</p> <p>or</p> <p>or</p> <p>or</p> <p>abrade</p> <p>○</p> <p>○</p> <p>○</p> <p>○</p> <p>○</p> <p>○</p> <p>prime</p> <p>or</p> <p>or</p> <p>or</p> <p>or</p> <p>or</p> <p>or</p> <p>abrade</p> <p>○</p> <p>○</p> <p>prime</p> <p>×</p> <p>×</p> <p>○</p> <p>○</p> <p>○</p> <p>PVC</p> <p>ABS</p> <p>PP</p> <p>PE</p> <p>○</p> <p>○</p> <p>○</p> <p>○</p> <p>×</p> <p>×</p> <p>○</p> <p>○</p> <p>○</p> <p>○</p> <p>○</p> <p>○</p> <p>○</p> <p>○</p> <p>×</p> <p>×</p> <p>○</p> <p>○</p> <p>○</p> <p>○</p> <p>×</p> <p>×</p> <p>○</p> <p>degrease <br />abrade</p> <p>○</p> <p>○</p> <p>○</p> <p>○</p> <p>○</p> <p>○</p> <p>prime</p> <p>×</p> <p>×</p> <p>or</p> <p>or</p> <p>or</p> <p>or</p> <p>required</p> <p>○ possible <br />× not required</p> <p>ASODUR-SG3-superfast <br />ASODUR-GBM, single coat broadcast with 0.1–0.6 mm quartz sand <br />ASODUR-GBM, 2 coats broadcast with 0.1–0.6 mm quartz sand <br /> Bonding agent (with quartz sand particles) for PP and PE, e.g. 3M™ Scotch-Weld™ DP 8005 <br />The waterproofing material must be dried before being exposed to water permanently. <br />The purchaser’s rights in regards to products quality are based on our sales and delivery terms. This technical drawing is strictly an example illustration and is not claimed to be exhautive. It <br />is the user’s responsibility to consult local building codes and regulations before carrying out any product applications. This version is no longer valid with the publication of a new version. <br />Always check our website for the most current valid version under www.schomburg.com. <br />11/25 JB/CoS/Tet/RiR/KK</p>
