SCHOMBURG Problems Solved.
BETOCRETE® - C Crystalline waterproofing admixture for enhancing crack healing and increasing durability in waterproof concrete components.
schomburg.com
Crystalline waterproofing admixture for accelerated crack healing and durable concrete BETOCRETE-C Water with damaging substances penetrates the concrete through cracks and capillary pores. Adding BETOCRETE crystalline waterproofing admixture makes the concrete more compact and cracks up to 0.4 mm can be sealed by crystallisation processes. The resistance and with it the service life of the waterproof concrete component increases measurably.
Durability In addition to accelerating and enhancing crack healing in BETOCRETE concretes, the crystalline additive also counteracts attacks on concrete. Studies show that carbonation rates heavily reduce the rate of chloride ion migration. The active crystalline processes are effective over the entire service life of the concrete component. Depending on the reference concrete, the service life of the concrete component can be more than doubled.
Economic efficiency BETOCRETE products can increase the economy of buildings over the short, medium and long term. Crystalline crack sealing reduces the number of injections during construction site operation or during the usage phase. The waterproof BETOCRETE concrete component is established directly during concreting with the concrete additive. Organisation of the construction site and the time required for subsequent waterproofing - e.g. by means of liquid - are eliminated, as is maintenance / restoration of the liquid waterproofing. And at the end of the component's service life, the concrete including additive can simply be recycled. The principle economic benefit is the increased service life of the concrete component.
Environmental friendliness Structural waterproofing is established with BETOCRETE concrete by dosing crystalline waterproofing admixture directly into the concrete. The use of recyclable IBCs or water-soluble bags does not generate construction site waste - unlike with liquid waterproofing products. The products last for the life of the building component, which makes renovation cycles with liquid waterproofing products superfluous. And at the end of the component's service life, the concrete component can simply be recycled.
Reliability in the system: BETOCRETE-CP360-WP BETOCRETE-CP360 -WP is a powder concrete admixture for the production of waterproof concrete with the innovative 2 in 1 technology.
BETOCRETE-CP350-CI BETOCRETE-CP350-CI is a powder concrete admixture for the production of waterproof concrete with the innovative 2 in 1 technology.
BETOCRETE-CL170-P BETOCRETE-CL170-P is a liquid concrete admixture for the production of waterproof concrete with the innovative 2 in 1 technology.
BETOCRETE-CL210-WP BETOCRETE-CL210-WP is a liquid concrete admixture for the production of waterproof concrete with the innovative 2 in 1 technology.
AQUAFIN-CJ5 AQUAFIN-CJ5 is a crystalline joint sheet for the internal waterproofing of construction joints in concrete structures.
Increase durability through crack healing and a more compact concrete structure
Powder and liquid dosing in the concrete possible Waterproofing products and system accessories in the SCHOMBURG range
SCHOMBURG GmbH & Co. KG Aquafinstrasse 2–8 D -32760 Detmold (Germany) phone + 49 - 52 31- 953 - 00 fax + 49 - 52 31- 953 -108 email export@schomburg.de www.schomburg.com
03/25 NT/tet/IsK/LaA Subject to change without prior notification. The valid issue of the corresponding technical bulletin legally applies.
Crystalline effect and concrete admixture in accordance with DIN EN 934-2