AQUAFIN-P4_-_Leistungserklärung_(2).pdf
2 页数
28.5 KB
Download
<h1>AQUAFIN-P4_-_Leistungserklärung_(2).pdf</h1> <p>Declaration of Performance <br />according Annex III of the Regulation (EU) No 305/2011 <br />amended by Commissions delegated Regulation (EU) No 574/2014</p> <p>For the product</p> <p>AQUAFIN-P4 <br />205221 <br />1.</p> <p>Unique identification code : <br />of the product type :</p> <p>2. Intended Use</p> <p>DIN EN 1504-5 U(D1) W(1) (1/2) (6/30)</p> <p>:</p> <p>DIN EN 1504-5 <br />Concrete injection product. <br />Concrete injection for force transmitting filling of <br />cracks, voids and interstices</p> <p>3. Manucfacturer :</p> <p>Schomburg GmbH & Co. KG <br />Aquafinstrasse 2-8 <br />32760 Detmold</p> <p>4. System/s of AVCP</p> <p>System 2+</p> <p>5. Harmonised standard :</p> <p>DIN EN 1504-5:2013</p> <p>6. Notifiied body :</p> <p>MFPA Leipzig GmbH <br />Identification no : 0800</p> <p>7. Erklärte Leistung:</p> <p>Essential characteristics</p> <p>Performance</p> <p>Adhesion by tensile bond <br />strength Adhesion and <br />elongation of stretchable <br />cracks <br />Watertightness <br />Injectability into dry <br />medium <br />Glass transition <br />temperature</p> <p>Elongation : 10 %</p> <p>System of assessment <br />and verification of <br />constancy of <br />performance</p> <p>DIN EN 15045:2013</p> <p>2 x 10^5 Pa</p> <p>Injectability class: <br />0,1 mm <br />-20°C</p> <p>Harmonised <br />Technical <br />specification</p> <p>System 2+</p> <p>Injectability into dry <br />medium <br />Injectability into not dry <br />medium <br />viscosity <br />Processing time <br />Compatibility with <br />concrete</p> <p>Injectability class : <br />0,1 mm <br />Injectability class : <br />0,1 mm <br />80 mPas (23°C) <br />180 minutes (23°C) <br />No failure in pressure <br />test Loss of the <br />molding capacity <br />(loss work) < 20% <br />based on the loss <br />work of the airbearing sample <br />produced with water</p> <p>The performance of the product identified above is in conformity with the set of declared <br />performance/s. This declaration of performance is issued, in accordance with Regulation (EU) No <br />305/2011, under the sole responsibility of the manufacturer identified above. <br />Signed for and on behalf of the manufacturer by:</p> <p>Michael Hölscher, Technischer Service Oberflächenschutz <br />(Name und Funktion)</p> <p>Detmold, 24.06.2022</p> <p>This declaration of performance was created electronically. It is valid without manual <br />signature.</p> <p>The current material safety data sheet and technical data sheet is downloadable under <br />https://www.schomburg.com/de/en/downloads/datasheets/materials_safety_data_sheet/d <br />or <br />https://www.schomburg.com/de/en/downloads/datasheets/technical_data_sheet/d</p>
