ASODUR-B3310 Leistungserklärung GB_20.10.2016.pdf
2 页数
72.8 KB
Download
<h1>ASODUR-B3310 Leistungserklärung GB_20.10.2016.pdf</h1> <p>Declaration of Performance <br />according Annex III of the Regulation (EU) No 305/2011 <br />amended by Commissions delegated Regulation (EU) No 574/2014</p> <p>for the product</p> <p>ASODUR-B3310 <br />20 6407</p> <p>1.</p> <p>Unique identification code of the product type:</p> <p>EN 1504-2 Principle 5.1/6.1/8.2</p> <p>2. Intended use:</p> <p>EN 1504-2 <br />Surface protection product / coating</p> <p>3. Manufacturer :</p> <p>Schomburg GmbH & Co. KG <br />Aquafinstrasse 2-8 <br />32760 Detmold</p> <p>4. System or systems of assessment and <br />verification of constancy of performance <br />of the construction product as:</p> <p>System 2+</p> <p>5. Harmonised standard</p> <p>EN 1504-2:2004</p> <p>6. Notified test laboratory:</p> <p>The notified testing laboratory KIWA <br />Polymer Institut, identification number 1119 <br />performed the determination of the producttype on the basis of type testing under <br />system 2 + and issued: <br />test report No. 1119-CPD-13126.</p> <p>7. Declared performance : <br />Essential characteristics</p> <p>Capillary water absorption <br />and water permeability <br />Pull off test for determination <br />of the adhesive strength <br />Abrasive resistance <br />Shock strength <br />Water vapour permeability <br />Strong chemical attack <br />resistance <br />Reaction to fire <br />Dangerous substances</p> <p>Performance</p> <p>2</p> <p>System of <br />assessment and <br />verification of <br />constancy of <br />performance</p> <p>Harmonised <br />technical <br />specification</p> <p>0,5</p> <p>w < 0,1 kg/m x h</p> <p>≥ 1,5 (1,0) N/mm²</p> <p>Lost of mass ≤ 3000 mg <br />Class III <br />Class II <br />Lost of hardness < 50%</p> <p>System 2+</p> <p>EN 1504-2:2004</p> <p>Class E <br />According 5.3 <br />(EN 1504-2)</p> <p>The performance of the product identified above is in conformity with the set of declared <br />performance/s. This declaration of performance is issued, in accordance with Regulation (EU) No <br />305/2011, under the sole responsibility of the manufacturer identified above.</p> <p>Signed for and on behalf of the manufacturer by: <br />Michael Hölscher, technical service surface protection systems <br />(name and function)</p> <p>Detmold, 20.10.2016</p> <p>This declaration of performance was created electronically. It is valid without manual <br />signature.</p> <p>The current material safety data sheet and technical data sheet is downloadable under <br />https://www.schomburg.com/de/en/downloads/datasheets/materials_safety_data_sheet/d <br />or <br />https://www.schomburg.com/de/en/downloads/datasheets/technical_data_sheet/d</p>
