CRISTALLIT-FLEX-max__Leistungserklärung__GB.pdf
2 页数
113.5 KB
Download
<h1>CRISTALLIT-FLEX-max__Leistungserklärung__GB.pdf</h1> <p>Declaration of Performance <br />according Annex III of the Regulation (EU) No 305/2011 <br />amended by Commissions delegated Regulation (EU) No 574/2014 <br />for the product</p> <p>CRISTALLIT-FLEX-max <br />205427 <br />1.</p> <p>Unique identification code of the product type:</p> <p>205427</p> <p>2. Intended use: Fast-hardening cement-based mortar for increased requirements indoors and outdoors <br />for tile and slab work</p> <p>3. Manufacturer :</p> <p>Schomburg GmbH & Co. KG <br />Aquafinstrasse 2-8 <br />32760 Detmold</p> <p>4. System or systems of assessment and <br />verification of constancy of performance <br />of the construction product as:</p> <p>System 3 Reaction to fire</p> <p>5.</p> <p>EN 12004:2004 + A1 :2012</p> <p>Harmonised standard :</p> <p>6. Notified test laboratory:</p> <p>7.</p> <p>The notified testing laboratory <br />MPA für das Bauwesen Braunschweig, <br />identification number 0761 and the notified <br />testing laboratory MPA für das Bauwesen <br />Dortmund NRW, identification <br />number 0432</p> <p>Declared performance</p> <p>Essential characteristic</p> <p>Reaction to fire <br />Bond strength as <br />Initial tensile adhesion strength <br />Early-Initial tensile adhesion <br />strength, after 6 h <br />Durability of bond strength as: <br />Tensile adhesion strength after <br />water immersion <br />Tensile adhesion strength after <br />heat ageing <br />Tensile adhesion strength after <br />freeze-thaw cycles <br />Release of dangerous substances</p> <p>Performance</p> <p>System of <br />assessment and <br />verification of <br />constancy of <br />performance</p> <p>Harmonised <br />technical <br />specification</p> <p>System 3</p> <p>EN 12004:2007 + <br />A1:2012</p> <p>E <br />≥ 1,0 N/mm2 <br />≥ 1,0 N/mm2</p> <p>≥ 1,0 N/mm2 <br />≥ 1,0 N/mm2 <br />≥ 1,0 N/mm2 <br />NPD</p> <p>The performance of the product identified above is in conformity with the set of declared performance/s. This <br />declaration of performance is issued, in accordance with Regulation (EU) No 305/2011, under the sole <br />responsibility of the manufacturer identified above.</p> <p>Signed for and on behalf of the manufacturer by: <br />Wilhelm Kreiling-Dreyer, technician <br />(name and function)</p> <p>Detmold, 23.02.2023</p> <p>This declaration of performance was created electronically. It is valid without manual signature.</p> <p>The current material safety data sheet and technical data sheet is downloadable under</p> <p>http://www.schomburg.de/de/Sicherheitsdatenblatt-datenblaetter.html <br />or <br />http://www.schomburg.de/de/Technisches_Merkblatt-datenblaetter.html</p>
