AQUAFIN-CA_207212_Englisch.pdf
3 页数
315.0 KB
Download
<h1>AQUAFIN-CA_207212_Englisch.pdf</h1> <p>Technical data sheet <br />AQUAFIN®-CA <br />One component hybrid universal adhesive and sealant for interior and exterior use</p> <p>Material number</p> <p>Contents</p> <p>Packaging</p> <p>Colour</p> <p>207212001</p> <p>290 ml</p> <p>Cartridge</p> <p>Grey</p> <p>207212002</p> <p>600 ml</p> <p>Tubular bag</p> <p>White</p> <p>Product features <br />Ready to use <br />Solvent free <br />Silicone and isocyanate-free</p> <p>Advantages <br />Adheres to damp substrates <br />Weather, age and UV-resistant <br />High initial adhesion <br />Cures under water</p> <p>Areas of application <br />For the fixing of swellable waterstops AQUAFIN®-CJ3/-CJ4/-CJ6 <br />For bonding overlaps of fresh concrete composite systems <br />For bonding and installing different materials in building construction and civil engineering (e.g. wood materials, glass, metals, plastics, <br />ceramics, brickwork, natural stone, plasterboard) <br />For various repair and assembly work (even under water) <br />For interior and exterior use</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />1/3</p> <p>14/10/2024</p> <p>Technical data sheet <br />AQUAFIN®-CA <br />Technical Data <br />Material properties <br />Product components <br />Base material <br />Consistency <br />Density (spec. weight) <br />Skin formation <br />Recovery capacity (ISO 7389) <br />Shore-A hardness (ISO 868) <br />Temperature resistance <br />Volume change until <br />Permissible total deformation (DIN EN ISO 11600)</p> <p>Ready to use <br />MS hybrid-polymer <br />Paste, non slump <br />approx. 1.46 g/cm³ <br />approx. 20 minutes <br />> 36 % <br />approx. 50 <br />- 40 + 95 °C <br /><6% <br />max. 15 %</p> <p>Application <br />Substrate/application temperature <br />Pot life <br />Consumption <br />Hardening process per 24 hours</p> <p>approx. 5 - 35 °C <br />approx. 30 minutes <br />approx. 25 ml / m adhesive bead depending on adhesive <br />thickness and width of adhesive zone <br />min. 3 mm</p> <p>Processing equipment <br />Aids/tools <br />Cartridge gun</p> <p>Suitable substrate <br />Concrete <br />Wood materials <br />Glass <br />Metal <br />Plastic <br />Ceramics <br />Brick <br />Natural stone <br />Plasterboard</p> <p>Preparing the substrate <br />Requirement for substrate <br />1. Load-bearing <br />2. Even <br />3. Pore open <br />4. Free of adhesion inhibiting substances</p> <p>Preparing the surface <br />1. Depending on the substrate condition, the cleaners ASO-R001, ASO-R003 or ASO-R008 may be suitable (observe the current technical data <br />sheets). <br />2. The substrate may be matt damp. <br />3. Water puddling is not permissible.</p> <p>Application <br />Application <br />1. In the case of surface bonding, the contact surfaces must be permeable to moisture (e.g. concrete, wood). Alternatively, apply the adhesive in <br />parallel beads spaced apart to ensure the moisture migration (humidity) required for curing. <br />2. Form adhesive joints with an excess adhesive thickness of at least 2 mm. <br />3. Avoid 3-point adhesion for joint water proofing. Carry out the joint water proofing in accordance with DIN 18540.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />2/3</p> <p>14/10/2024</p> <p>Technical data sheet <br />AQUAFIN®-CA <br />Bonding of fresh concrete systems <br />1. Apply AQUAFIN®-CA copiously to the AQUAFIN®-WM12 overlap area. <br />2. Remove the gun cleanly and abruptly. Due to the very good bonding force, AQUAFIN-CA pulls itself out when the cartridge gun is removed. <br />3. The concreting process can take place no sooner than 8 hours after adhesion. <br />4. Press the next film into the fresh adhesive.</p> <p>Adhesion of swellable waterstops <br />1. Apply AQUAFIN-CA fully to the substrate in the overlap area. <br />2. Remove the gun cleanly and abruptly. Due to the very good bonding force, AQUAFIN-CA pulls itself out when the cartridge gun is removed. <br />3. Press the swellable waterstops into the fresh adhesive until it is pressed out from underneath. <br />4. The concreting process can take place no sooner than 8 hours after adhesion.</p> <p>Storage conditions <br />Storage <br />Cool, dry, protected from sunlight. Min. 24 months in the original canister. Promptly use opened container.</p> <p>Notes <br />Protect surfaces that are not to be treated from the effects of AQUAFIN®-CA! <br />Not suitable for aquariums. <br />The technical datasheets and processing instructions for the swellable waterstops and fresh concrete waterproofing membranes to be used <br />must be observed. <br />All information and recommendations in this technical data sheet are based on current experience, tests performed and advice given by <br />users. Due to the high number of different influences that occur during applications and the differences between applications / building <br />materials, it is the user's responsibility to determine whether the adhesive or the intended bonding method is suitable for the respective <br />application by carrying out their own tests and trial bonding processes.</p> <p>Observe applicable safety data sheet! <br />GISCODE: RU1</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you <br />in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description <br />does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />3/3</p> <p>14/10/2024</p>
