ASOCRET-BIS-5-40_206438_Englisch.pdf
4 页数
1.1 MB
Download
<h1>ASOCRET-BIS-5-40_206438_Englisch.pdf</h1> <p>Technical data sheet <br />ASOCRET-BIS-5/40 <br />Cementitious repair mortar for breakage points of 5 – 40 mm</p> <p>Material number</p> <p>Contents</p> <p>Unit of quantity</p> <p>Packaging</p> <p>Colour</p> <p>206438001</p> <p>25</p> <p>KG</p> <p>Bag</p> <p>Cement grey</p> <p>Areas of application <br />As a non slump re-profiling mortar <br />For levelling pool tank walls, as well as modelling pool edges in swimming pools <br />For concrete repair <br />For walls and floors <br />For breakout depths von 5 mm bis 40 mm</p> <p>Advantages <br />watertight <br />Vapour permeable <br />Frost proof and resistant to thaw <br />Can be trowelled and sprayed <br />High resistance to carbonation</p> <p>Product features <br />Cement-based re-profiling mortar (PCC) <br />CE after DIN EN 1504-03 <br />Chloride-free <br />Largest grain size: ≤ 4 mm</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />1/4</p> <p>01/04/2025</p> <p>Technical data sheet <br />ASOCRET-BIS-5/40 <br />Technical Data <br />Material properties <br />Product components <br />Base material <br />Consistency <br />Bulk density of fresh mortar <br />Compressive strength (24 hrs.) <br />Compressive strength (7 days) <br />Compressive strength (28 days) <br />Flexural strength (24 hrs.) <br />Flexural strength (7 days) <br />Flexural strength (28 days) <br />Tensile adhesion strength DIN EN 1542 <br />Curve E module (DIN 53452) <br />Chloride content <br />Classification of the reaction to fire in accordance with DIN EN 13501-1</p> <p>1 component system <br />Pre-blended dry mortar <br />Filler consistency <br />approx. 2.1 kg/dm³ <br />approx. 14 N/mm² <br />approx. 50 N/mm² <br />approx. 60 N/mm² <br />approx. 4 N/mm² <br />approx. 8 N/mm² <br />approx. 9 N/mm² <br />≥ 2 N/mm² <br />approx. 20 GPa <br />≤ 0.05 % <br />A1</p> <p>Mixing <br />Mixing time <br />Water addition</p> <p>approx. 3 minutes <br />approx. 3.5 l - 3.75 l</p> <p>Application <br />Substrate/application temperature <br />Pot life <br />Method of application, max. layer thickness per application step <br />Consumption pro m² and mm layer thickness <br />Overcoat after (min.) <br />Foot traffic after</p> <p>approx. 5 - 30 °C <br />approx. 60 minutes <br />up to 20 mm <br />approx. 1.8 kg/m² <br />after 24 hours <br />approx. 24 hours</p> <p>Processing equipment <br />Aids/tools <br />Stirrer (approx. 500-700 rpm) <br />Suitable mixing paddle <br />Trowel <br />Flat trowel <br />Rubber squeegee <br />Spray equipment <br />Construction compressor <br />Forced paddle mixer</p> <p>Manual processing <br />Can be trowelled off</p> <p>Machine application <br />ASOCRET-BIS-5/40 can be mechanically applied. For precise information, see the additional Technical Information No. 43.</p> <p>Suitable substrate <br />Concrete <br />Cement-based screed (CT)</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />2/4</p> <p>01/04/2025</p> <p>Technical data sheet <br />ASOCRET-BIS-5/40 <br />Preparing the substrate <br />Requirement for substrate <br />1. Firm <br />2. Grippy <br />3. Load-bearing <br />4. Pore open <br />5. Free of adhesion inhibiting substances</p> <p>Preparing the details <br />1. If no previous concrete restoration work has been carried out, a substrate preparation (e.g. granulate, shot, ultra-high pressure water jetting (5002000 bar)) is required. <br />2. Exposed reinforcing steels must be pretreated with the corrosion protection ASOCRET-HS-FLEX in accordance with the technical data sheet.</p> <p>Preparing the surface <br />Pre-moisten the dry substrate so that it is matt damp at the time of application.</p> <p>Application <br />Mixing <br />1. Put approx. 2.8-3.0 l of water into a clean mixing bucket and mix with 25 kg of the powder component to produce a homogeneous, lump-free <br />mass. <br />2. Pre-mix for approx. 3 minutes. <br />3. Finally, add the remaining water quantity and mix sufficiently. <br />4. The mixing time is ca. 3 minutes. <br />5. Use a forced paddle mixer for larger coatings.</p> <p>Application <br />1. The mineral bond coat ASOCRET-HS-FLEX is brushed, fully covering and pore-deep, into the prepared, matt damp substrate with a hard brush. <br />2. The repair mortar ASOCRET-BIS-5/40 is subsequently applied while still wet in the required layer thickness. <br />3. Then the mortar is compacted and levelled flush with the surface. <br />4. With large surface applications, the layer thickness can be up to max. 20 mm in one application step! <br />5. We recommend a multiple skin-layed application for greater layer thicknesses.</p> <p>Curing <br />1. After applying ASOCRET-BIS-5/40, the mortar surfaces must generally be protected from rapid drying using suitable measures. <br />2. To do this, keep the surfaces damp for at least 3-5 days using water mist nozzles, wet jute sheets or even by covering with film. <br />3. The film must be attached to the surfaces to be treated in such a way that an air exchanged is ruled out. <br />4. If the mortar surfaces concerned are exposed to direct sunlight, draughts, high temperature fluctuations and/or low humidity, more attention must <br />be paid to the curing measures. <br />5. If a subsequent waterproofing with cementitious waterproofing slurry is intended, this can be applied as an alternative curing method after <br />approx. 24 hours.</p> <p>Cleaning tools <br />Rinse tools with water immediately after use.</p> <p>Storage conditions <br />Storage <br />Cool, dry, protected from sunlight. Min. 12 months in the original canister. Promptly use opened container.</p> <p>Disposal <br />Must not be disposed of in household waste. Do not allow to enter the sewer system.</p> <p>Notes <br />Before any concrete restoration measures, the current state must generally be checked by an expert and/or structural engineer. The test <br />report must be made available to the processor before starting the restoration measures. <br />Protect surfaces that are not to be treated from the effects of ASOCRET-BIS-5/40! <br />Do not add water or new mortar to existing ASOCRET-BIS-5/40 mortar that has already set in order to make it workable again. (Risk of <br />inadequate strength development)</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />3/4</p> <p>01/04/2025</p> <p>Technical data sheet <br />ASOCRET-BIS-5/40 <br />Observe applicable safety data sheet! <br />GISCODE: ZP1 <br />Explanations <br />Conformity / Declaration / Verification</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you <br />in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description <br />does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />4/4</p> <p>01/04/2025</p>
