ASOL-FE_202840_Englisch.pdf
4 页数
737.4 KB
Download
<h1>ASOL-FE_202840_Englisch.pdf</h1> <p>Technical data sheet <br />ASOL-FE <br />Bitumen primer/protective coating, elastic, solvent-free</p> <p>Material number</p> <p>Contents</p> <p>Unit of quantity</p> <p>Packaging</p> <p>Colour</p> <p>202840009</p> <p>1000</p> <p>L</p> <p>Container (IBC)</p> <p>Black</p> <p>202840006</p> <p>5</p> <p>L</p> <p>Pail</p> <p>Black</p> <p>202840007</p> <p>14</p> <p>L</p> <p>Pail</p> <p>Black</p> <p>202840008</p> <p>28</p> <p>L</p> <p>Pail</p> <p>Black</p> <p>Fields of application / waterproofing <br />As protective coating to protect against pressure and non pressure seepage water <br />As a primer <br />For underground and shaft construction <br />For interior and exterior use</p> <p>Product features <br />Latex-enhanced bituminous emulsion <br />Ready to use</p> <p>Advantages <br />Can be applied by brush, roller and spray <br />Solvent free <br />Versatile</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />1/4</p> <p>31/03/2025</p> <p>Technical data sheet <br />ASOL-FE <br />Technical Data <br />Material properties <br />Product components <br />Base material <br />Consistency <br />Density, ready to use product (ISO 1183-1) <br />Radon diffusion constant [D]</p> <p>Ready to use <br />Bitumen/latex emulsion <br />liquid, paste <br />approx. 1.01 kg/dm³ <br />6.9*10-12 m²/s</p> <p>Application <br />Substrate/application temperature <br />Consumption pro m² and mm layer thickness <br />Consumption</p> <p>approx. 5 - 30 °C <br />approx. 1.5 l <br />Protective coating: approx. 300–500 ml/m² per coat <br />Membrane primer: approx. 100–125 ml/m² Bituminous primer: <br />approx. 40 – 60 ml/m²</p> <p>Processing equipment <br />Aids/tools <br />Brush <br />Colour roller <br />Primer brush <br />Spray equipment</p> <p>Suitable substrate <br />Cement plaster <br />Masonry work <br />Concrete <br />Old, firmly adhering bituminous substrates</p> <p>Preparing the substrate <br />Requirement for substrate <br />1. Dry <br />2. Load-bearing <br />3. Even <br />4. Pore open <br />5. Sealed in the surface <br />6. Free of adhesion inhibiting substances</p> <p>Preparing the details <br />1. Depressions > 5 mm and mortar pockets, plaster grooves in brickwork, open butt or bed joints, damaged areas, large pored substrates or <br />uneven masonry work must be levelled in advance with ASOCRET-M30. <br />2. Level recesses < 5 mm with ASOCRET-M30 or AQUAFIN-1K.</p> <p>Preparing the surface <br />1. Cement paste and components that can be washed off must be removed mechanically. <br />2. Pre-screen with ASOCRET-M30 in the base slab-wall transition, at corners and edges and install a cove while still wet.</p> <p>Application <br />Protective coating <br />1. Apply ASOL-FE (diluted 1:5 with water) as a primer. <br />2. Apply the protective coating undiluted in at least two application steps. <br />3. At least three application steps are necessary when exposed to pressurised water. <br />4. The subsequent coat is always carried out after the previous coat has dried sufficiently.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />2/4</p> <p>31/03/2025</p> <p>Technical data sheet <br />ASOL-FE <br />Primer for COMBIDIC bituminous thick layer coating <br />1. Dilute ASOL-FE with water. (1:5) <br />2. Apply the diluted material with the chosen tool. <br />3. Apply the COMBIDIC bituminous thick layer coating only after the primer has completely dried.</p> <p>Primer under KSK-Abdichtungsbahn or polymer bitumen welding membranes <br />1. Dilute ASOL-FE with water depending on the absorbency of the substrate. (max. 1:1) <br />2. Apply the diluted material with the chosen tool. <br />3. Do not apply the KSK-Abdichtungsbahn or polymer bitumen welding membrane until the primer has dried completely.</p> <p>Cleaning tools <br />Rinse tools with water immediately after use.</p> <p>Drainage and protection boards for building components in contact with the ground <br />The waterproofing must be protected against weathering influences and mechanical damage using suitable protective measures in accordance <br />with DIN 18533. 1. The waterproofing must be totally dry. 2. Suitable protection and drainage boards can be fixed in place with COMBIDIC1K/-S in batches. 3. Perimeter insulation must cover the whole area and be butt jointed with COMBIDIC-2K-CLASSIC or COMBIDIC-2KPREMIUM. 4. Drainage is carried out in accordance with the specifications of DIN 4095.</p> <p>Storage conditions <br />Storage <br />Store in a frost-free, cool and dry place. At min. 5 - 40 °C for 12 months in the original canister. Promptly use opened container.</p> <p>Disposal <br />Product residues can be disposed of in accordance with disposal code AVV 17 03 02.</p> <p>Notes <br />Protect surfaces that are not to be treated from the effects of ASOL-FE! <br />Negative water pressure cannot be absorbed by bituminous waterproofing. It is necessary to apply waterproofing with AQUAFIN®-1K <br />beforehand in the areas in which this can be expected. <br />Protect masonry work tops and open window parapets against water penetration. <br />Do not apply during rain or with air / substrate temperatures below +5 °C. <br />Protect ASOL-FE from weathering influences such as rain, frost, strong solar radiation, etc. until totally dry!</p> <p>Observe applicable safety data sheet! <br />GISCODE: BBP10 <br />Explanations <br />Conformity / Declaration / Verification</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />3/4</p> <p>31/03/2025</p> <p>Technical data sheet <br />ASOL-FE</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you <br />in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description <br />does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />4/4</p> <p>31/03/2025</p>
