BETOCRETE-CL210-WP_206444_Englisch.pdf
3 页数
1.4 MB
Download
<h1>BETOCRETE-CL210-WP_206444_Englisch.pdf</h1> <p>Technical data sheet <br />BETOCRETE®-CL210-WP <br />Crystalline waterproofing admixture with hydrophobic properties</p> <p>Material number</p> <p>Contents</p> <p>Unit of quantity</p> <p>Packaging</p> <p>Colour</p> <p>206444001</p> <p>25</p> <p>KG</p> <p>Canister</p> <p>White</p> <p>206444002</p> <p>220</p> <p>KG</p> <p>Drum</p> <p>White</p> <p>206444003</p> <p>1040</p> <p>KG</p> <p>Container (IBC)</p> <p>White</p> <p>Areas of application <br />For integral crystalline waterproofing of concrete components in direct ground contact <br />For foundations and watertight concrete components <br />For economic, commercial, sports facilities and housing construction <br />For infrastructure, water and wastewater structures <br />For in-situ concrete, pre-cast concrete components and shotcrete</p> <p>Product features <br />Liquid <br />Increased active crack healing in concrete <br />Sealant in accordance with DIN EN 934-2: Table 9 <br />Improves frost resistance and resistance to thaw <br />Reduced chloride ion migration <br />lower carbonation speed <br />Available in a BBA-certified version</p> <p>Advantages <br />crack healing of surface and continuous cracks up to 0.4mm (tapering down to 0.5mm) possible <br />Sealant reduces water absorption immediately <br />Lower water input means lower input of concrete-damaging substances <br />Increase durability of concrete component <br />Minimisation of concrete servicing and maintenance costs <br />Economic liquid dosing in the concrete plant</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />1/3</p> <p>16/04/2025</p> <p>Technical data sheet <br />BETOCRETE®-CL210-WP <br />Technical Data <br />Material properties <br />Density (spec. weight) <br />Alkali content (Na2O equivalent) <br />Chloride content <br />pH value <br />Water pollution class (WGK)</p> <p>approx. 1.05 g/cm³ <br />≤ 8.5 percentage by weight <br />≤ 0.1 % <br />approx. 11.00 - 12.00 <br />1 (Selbsteinstufung)</p> <p>Mixing <br />Mixing time <br />Mixing time, mixer truck (transport concrete)</p> <p>approx. 45 seconds <br />approx. 1 minute per m³</p> <p>Application <br />Application temperature <br />Recommended dosing in regards to cement</p> <p>approx. 8 - 40 °C <br />approx. 1.75 - 2.25 %</p> <p>Material rate <br />Material consumption rate according to the area of application</p> <p>Minimum cement content in concrete</p> <p>Application <br />Dosing in concrete plant <br />BETOCRETE®-CL210-WP can be added with the mixing water or the finished concrete mixture.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />2/3</p> <p>16/04/2025</p> <p>Technical data sheet <br />BETOCRETE®-CL210-WP <br />Dosing in mixer truck <br />1. BETOCRETE®-CL210-WP is dosed directly into the mixing drum of the mixer truck <br />2. The mixing time must be approx. 1 minute per m³ drum content (however, at least 5 minutes).</p> <p>Storage conditions <br />Storage <br />Store in a frost-free, cool and dry place. At min. 8 - 40 °C for 12 months in the original canister. Promptly use opened container.</p> <p>Notes <br />At storage temperatures > +30 °C, BETOCRETE®-CL210-WP may change colour. This will not have a negative influence on the product <br />features. <br />Stir BETOCRETE®-CL210-WP thoroughly after a long storage period (> 1 month). <br />BETOCRETE®-CL210-WP modified concretes may have crystals on the surface, depending on the composition. <br />Concrete with BETOCRETE®-CL210-WP must be produced, applied and post-treated in accordance with the currently valid standards. <br />Lignite fly ash is only of limited suitability. <br />The crack expansion limitations must be complied with by the planner/engineer/structural engineer under any circumstances. Contrary <br />designs must be verified after the corresponding verification and suitability! <br />In rare cases, BETOCRETE®-CL210-WP can influence the solidification behaviour of the concrete. As a system-compatible product, <br />RUXOLITH-T5 (VZ) is available for controlling the concrete. <br />Before applying BETOCRETE®-CL210-WP, even with other types of additives, preliminary tests must be carried out in accordance with the <br />valid standards. <br />The use of CEM III/C cements is prohibited. <br />As the amount of Portland cement in the concrete decreases and the dosage is reduced, the crystallization processes may slow down. <br />Excluded are concretes of exposure class XA3 in accordance with DIN EN 206-1/DIN 1045-2. <br />Movements in the concrete component, e.g. due to traffic loads or temperature differences, can cause sealed crystalline cracks to open <br />again.</p> <p>Observe applicable safety data sheet! <br />Explanations <br />Conformity / Declaration / Verification</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you <br />in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description <br />does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />3/3</p> <p>16/04/2025</p>
