MONOFLEX-S2_204309_Englisch.pdf
4 页数
1.2 MB
Download
<h1>MONOFLEX-S2_204309_Englisch.pdf</h1> <p>Technical data sheet <br />MONOFLEX-S2 <br />Highly flexible accelerated tile adhesive S2</p> <p>Material number</p> <p>Contents</p> <p>Unit of quantity</p> <p>Packaging</p> <p>Colour</p> <p>204309001</p> <p>20</p> <p>KG</p> <p>Bag</p> <p>light grey</p> <p>Product features <br />Cementitious tile adhesive <br />C2 E S2 after DIN EN 12004 <br />Pot life of ca. 90 minutes <br />Can be walked on and joined after ca. 6 hours <br />Adhesive bed thicknesses ca. 1 - 10 mm</p> <p>Advantages <br />Enables tiles and boards to be laid on ‘green’ substrates <br />Reliable drying - even with mega formats <br />Convenient compaction properties</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />1/4</p> <p>20/03/2025</p> <p>Technical data sheet <br />MONOFLEX-S2 <br />Areas of application <br />For laying ceramic tiles and boards using thin-bed laying <br />Especially for laying large and mega formats <br />For laying on ‘green’ cement-based screeds with a residual moisture content of ≤ 4.0 CM-% in tile format up to 120 cm x 120 cm <br />For laying on ‘green’ cement-based screeds in accordance with DIN 18560 - from day 3 to Day 10 after completion of screeding in tile <br />format up to 120 cm x 120 cm <br />for laying on ‘green’ calcium sulphate binded screeds up to a maximum residual moisture content of 1.2 CM-% in combination with ASO®Unigrund-PLUS for tile formats up to 120 x 120 cm <br />for heated and unheated substrates <br />For walls and floors <br />For interior</p> <p>Existing test certificates <br />Test report in accordance with DIN EN 12004 <br />EMICODE licence <br />AgBB certificate <br />AbP (general test certificate from the building authorities)</p> <p>Technical Data <br />Material properties <br />Base material</p> <p>Vapour diffusion behaviour <br />Classification of the reaction to fire in accordance with DIN EN 13501-1</p> <p>sand <br />cement <br />Additive <br />Vapour permeable <br />E</p> <p>Mixing <br />Mixing time <br />Water addition</p> <p>approx. 3 minutes <br />from 5.6 l to 6.4 l</p> <p>Application <br />Substrate temperature <br />Pot life <br />Consumption pro m² and mm layer thickness <br />Foot traffic after <br />Consumption with 4mm notched trowel <br />Consumption with 6mm notched trowel <br />Consumption with 8mm notched trowel <br />Consumption with 10mm notched trowel <br />Consumption with 20mm trowel with semicircular teeth <br />Available after <br />Hardening time / full resilience</p> <p>from 5 °C to 25 °C <br />approx. 90 minutes <br />approx. 0.9 kg <br />approx. 6 hours <br />1.3 kg/m² <br />1.9 kg/m² <br />2.5 kg/m² <br />3.2 kg/m² <br />6.2 kg/m² <br />approx. 6 hours <br />approx. 7 days</p> <p>Processing equipment <br />Aids/tools <br />Toothed or centre bed trowel <br />Stirrer <br />Trowel <br />Occupational safety equipment</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />2/4</p> <p>20/03/2025</p> <p>Technical data sheet <br />MONOFLEX-S2 <br />Suitable substrate <br />Firmly adhering tiled finishes <br />Concrete, cement screed (CT), floor levelling compounds, calcium sulphate screeds (CA, CAF), mastic asphalt screeds (AS), magnesia <br />screeds (MA) <br />Cement-based plaster, gypsum plaster, cement-lime plaster, lightweight plaster <br />Tile bearing elements, gypsum fibre boards, gypsum boards, raised floors, cement and fibre cement boards, decoupling mats & panels, dry <br />screeds <br />Bonded waterproofing; the suitability of the substrate must be checked and observed, taking into account the planned water impact class of <br />DIN 18534 and DIN 18531.</p> <p>Preparing the substrate <br />Requirement for substrate <br />1. Load-bearing <br />2. Dry <br />3. Even <br />4. Sealed in the surface <br />5. Free of cracks <br />6. Free of adhesion inhibiting substances and laitance layers</p> <p>Preparing the surface <br />1. Check the application substrate and determine the moisture content using the CM method. <br />2. Remove impurities, adhesion-reducing substances and binder accumulations/laitance layers. <br />3. Prime absorbent substrates with ASO-Unigrund-GE, ASO-Unigrund-K or ASO-Unigrund-PLUS. <br />4. Prime non-absorbent substrates with ASO-Unigrund-S or ASO-Unigrund-PLUS. <br />5. Prime calcium sulphate screeds with a residual moisture content of max. 1.2 CM-% with ASO-Unigrund-PLUS.</p> <p>Application <br />Mixing <br />1. Fill the water into a clean mixing bucket and mix with the powder component with a stirrer to produce a homogeneous, lump-free mass. <br />2. Do not mix more material than can be applied during the pot life.</p> <p>Application <br />1. Spread the mixed mortar evenly across the substrate surface and comb through with a suitable notched trowel to suit the board size. <br />2. Apply the surfacing materials within the adhesive open time. <br />3. For tile formats with an area of 0.25 m² or more per tile and/or an edge length of > 60 cm, a scratch coat should be applied to the back. <br />4. For laying on ‘green’ cement-based/calcium sulphate screeds, a scratch coat must be applied to the back. <br />5. When using a tile levelling system, the tightening wedge must be driven in or the rotating cap must be tightened within the bonding open time of <br />the applied thin-bed mortar.</p> <p>Cleaning tools <br />Clean tools thoroughly with water after use.</p> <p>Commissioning of floor heating systems <br />1. Underfloor heating can be put into regular operation after 7 days. <br />2. For coverings that were laid on ‘green’ cement-based screeds, the any existing floor heating system must be commissioned and documented in <br />accordance with the Schomburg MONOFLEX-S2 heating protocol.</p> <p>Storage conditions <br />Storage <br />Store in a cool and dry place. Min. 12 months in the original canister. Promptly use opened container.</p> <p>Disposal <br />Product residues can be disposed of in accordance with disposal code AVV 17 01 01.</p> <p>Emission behaviour / building certification systems <br />Very low emissions in accordance with GEV-EMICODE, which normally results in positive evaluations within the scope of building <br />certification systems in accordance with DGNB, LEED, BREEAM, HQE. <br />Maximum quality level 4, line 8 in accordance with DGNB criteria "ENV 1.2 Risks to the local environment".</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />3/4</p> <p>20/03/2025</p> <p>Technical data sheet <br />MONOFLEX-S2 <br />Notes <br />The installation of tiles and natural stone coverings on ‘green’ substrates or cement-based screeds (< 28 days) with an increased residual <br />moisture of > 2.0 CM-% or calcium sulphate screeds with an increased residual moisture content of > 0.5 CM-% is a special construction <br />which deviates from the applicable recognised rules of technology and/or the relevant DIN standards. <br />When laying tiles in large or mega format, the tile manufacturer’s laying instructions and product data sheets must be observed. <br />When laying natural stone and synthetic stone, the product-specific properties of the coating materials (tendency to discolour, risk of curling, <br />etc.) and the laying recommendations of the manufacturer must be taken into account. We recommend carrying out trial laying! <br />Rooms, surfaces and building components that expect water exposure after DIN 18534, DIN 18531 and DIN 18535 must be protected <br />by bonded waterproofing. <br />Calcium sulphate screeds must be protected with the ASO®-Unigrund-GE, ASO®-Unigrund-K or ASO®-Unigrund-PLUS primers prior to <br />laying. Calcium sulphate screeds must be protected with a barrier primer (e.g. ASODUR®-GBM) when laying large format tiles. <br />Do not stir or add water to existing material that has already set in order to make it workable again. <br />Use a barrier primer such as ASODUR®-GBM to protect substrates that are sensitive to moisture, such as magnesite screeds, from direct <br />contact. <br />Protect the product from water, frost, draughts, direct sunlight and mechanical loads until it has dried completely.</p> <p>Relevant regulations <br />Planning, inspection of substrates and building site circumstances, laying, grouting and subsequent <br />care of the work must be done in accordance with the relevant DIN standards and recognised rules of <br />technology (e.g. the ZDB Data sheets of the Zentralverband Deutsches Baugewerbe e.V.(German <br />construction Association) in the latest version. <br />Observe applicable safety data sheet! <br />GISCODE: ZP1 <br />Explanations <br />Conformity / Declaration / Verification</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you <br />in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description <br />does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.</p> <p>SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com <br />4/4</p> <p>20/03/2025</p>
