SCHOMBURG-Thermopal-Bodensanierungssystem.pdf
12 页数
11.0 MB
Download
<h1>SCHOMBURG-Thermopal-Bodensanierungssystem.pdf</h1> <p>SCHOMBURG <br />Problems Solved.</p> <p>THERMOPAL® <br />FLOOR RENOVATION SYSTEM <br />To renovate critical <br />and cracked surfaces</p> <p>schomburg.com</p> <p>THERMOPAL® floor renovation system | The system</p> <p>OVERVIEW <br />OF THE SYSTEM <br />Renovate critical substrates <br />quickly and effectively. <br />Renovating substrates with cracks and a low load bearing <br />capacity often poses a major challenge. It is particularly <br />problematic if insufficient sealing measures cause permanent <br />moisture from the substrate, which may impair the stability and <br />service life of building components in the long term. <br />Furthermore, removing the screed is extremely time consuming <br />and laborious, which results in a great deal of wasted time and <br />money. Treating individual cracks with reaction resin is also often <br />very time-intensive and complicated.</p> <p>2</p> <p>The THERMOPAL floor renovation system removes <br />the need to treat cracks individually and restores the load bearing <br />capacity of old substrates. <br />In addition, it contributes to stabilising the substrate situation. <br />Critical substrates can therefore be prepared for laying <br />the following covering designs. Furthermore, it provides <br />a sealing effect against rising dampness from the substrate. <br />The THERMOPAL floor renovation system can extend the lifecycle <br />of existing substrates significantly.</p> <p>AREAS OF APPLICATION</p> <p>SYSTEM ADVANTAGES <br />• Time-saving renovation <br />• Low installation height <br />• Substrate stabilising <br />• Seals to prevent dampness <br />• Crack bridging</p> <p>• Usable areas in living spaces <br />• Garages & workshop areas <br />• Industrial floors <br />• For interior and exterior use <br />• For building component transitions <br />• For sub-surface preparation of subsequent <br />wearing surfaces and coverings</p> <p>3</p> <p>THERMOPAL® floor renovation system | The system</p> <p>THERMOPAL® <br />SYSTEM SETUP <br />Renovate critical <br />substrates quickly <br />and effectively.</p> <p>1.</p> <p>4</p> <p>2.</p> <p>The THERMOPAL® floor renovation <br />system enables fast and uncomplicated <br />renovation of substrates with a low <br />load bearing capacity, which have <br />moisture damage and cracks. <br />3.</p> <p>Substrates with cracks, limited load bearing capacity and dampness <br />pose a special challenge when renovating and therefore require targeted <br />measures. The THERMOPAL floor renovation system offers an effective <br />solution for this, as it both stabilises the substrate and protects against <br />rear soaking from the substrate.</p> <p>1.</p> <p>ASO-RSG <br />Crack prevention fabric</p> <p>2.</p> <p>ASODUR-SG3-thix + <br />Quartz sand sprinkling <br />Epoxy resin barrier primer <br />for damp substrates</p> <p>3.</p> <p>ASOCRET-HFF <br />Cementitious industrial flooring <br />for mechanically exposed areas</p> <p>5</p> <p>THERMOPAL® floor renovation system | Products in the system</p> <p>PRODUCTS <br />IN DETAIL <br />Overview of the products <br />from the system. <br />Substrates with cracks, limited load bearing capacity <br />and dampness represent a demanding task when renovating <br />and therefore require targeted measures. The THERMOPAL <br />floor renovation system offers an effective solution by enabling <br />comprehensive stabilisation and waterproofing. <br />Using products such as ASODUR-SG3-thix, a thixotropic epoxy <br />resin barrier primer enables damp substrates to be treated <br />reliably. ASOCRET-HFF, a cementitious industrial coating, ensures <br />high resilience and protection against mechanical effects.</p> <p>The RD-SK 50 self-adhesive edging strip protects against <br />the back floating possibility and minimises acoustic bridges. <br />To stabilise the system layout, the ASO-RSG crack prevention <br />fabric offers outstanding crack bridging and stabilisation. Overall, <br />this system extends the lifecycle of existing substrates and <br />guarantees sustainable renovation.</p> <p>ASO®-RSG <br />Crack prevention fabric to renovate <br />critical and cracked surfaces <br />• Crack bridging <br />• Stabilising <br />• High tensile strength <br />• Easy application</p> <p>6</p> <p>ASODUR®-SG3-thix <br />Epoxy resin barrier primer <br />for damp substrates, thixotropic <br />• Solvent free <br />• Moisture-tolerant and diffusion-blocking <br />• Adheres very well to damp substrates <br />• Waterproof against negative pressing <br />water up to 3 bar</p> <p>ASOCRET-HFF <br />Cementitious industrial flooring <br />for mechanically exposed areas <br />• Rapid setting and early load-bearing <br />• High wear and abrasion resistance against air, <br />solid rubber and Vulkolan tyres <br />• Vapour permeable <br />• Resistant to chlorine and CO²</p> <p>RD-SK 50 <br />Self-adhesive edging strip <br />• With adhesive base <br />• 5 mm thickness <br />• Effective protection against back floating possibility <br />• Prevents clamping & acoustic bridges</p> <p>7</p> <p>THERMOPAL® floor renovation system | ASO®-RSG</p> <p>ASO®-RSG <br />The crack prevention fabric <br />with 4-dimensional movement <br />accommodation. <br />ASO-RSG is a specially woven reinforcement fabric with <br />4-dimensional movement accommodation for safe crack <br />bridging and repairing substrates that are not load-bearing. <br />Thanks to the special fabric bond, it’s not just horizontal and <br />vertical forces that are absorbed, but diagonal movements <br />are compensated safely. <br />As part of the THERMOPAL floor renovation system, <br />it removes the need for time-consuming individual crack <br />treatment and restores the load bearing capacity <br />of old substrates. <br />In addition, it contributes to stabilising the substrate situation. <br />Critical substrates can therefore be prepared for laying <br />the following covering designs.</p> <p>ADVANTAGES <br />• 4-dimensional movement accommodation <br />• Resistant to alkalis <br />• Suitable for floor and wall surfaces <br />• Simple application</p> <p>4D</p> <p>i <br />ASO-RSG stabilises <br />the substrate by up to 65%. <br />8</p> <p>Strength development of the construction in N/mm2 <br />8 <br />7 <br />6,6 <br />6 <br />5 <br />4,0 <br />4 <br />3 <br />2 <br />1 <br />0 <br />Applied screed*</p> <p>THERMOPAL-Floor renovation system <br />with ASO-RSG</p> <p>*Example of strength development in <br />relation to the flexural tensile strength.</p> <p>9</p> <p>THERMOPAL® floor renovation system | The application</p> <p>THERMOPAL® <br />APPLICATION <br />Application recommendation <br />for the THERMOPAL® <br />floor renovation system <br />SUBSTRATE PREPARATION <br />1.</p> <p>Remove low strength components using diamond grinding <br />or shot blasting. Vacuum the substrate to ensure that it is <br />dust-free.</p> <p>2.</p> <p>Apply the RD-SK50 self-adhesive edging strips <br />to the wall-floor transition and the rising building <br />components in advance. If the floor/wall transition is <br />missing, establish the waterproofing level in advance.</p> <p>ROLL OUT AND LAY CRACK <br />PREVENTION FABRIC <br />3.</p> <p>4.</p> <p>Cut the ASO-RSG to the relevant length. <br />Place fabric strips onto the prepared substrate with <br />the printed side facing up. Maintain a gap of at least 3 cm <br />to rising building components. <br />Overlap the ends of the strips <br />by at least 20 mm.</p> <p>1.</p> <p>COAT AND EMBED CRACK <br />PREVENTION FABRIC</p> <p>5.</p> <p>6.</p> <p>Coat the surface with ASODUR-SG3-thix. <br />Use a rubber pusher and a nylon roller <br />to apply the coating evenly. Then roll over <br />the surface again and level it. <br />Use plenty of 0.5 - 1.0 mm fire-cured quartz <br />sand to sand off the freshly-applied coat of <br />ASODUR-SG3-thix evenly.</p> <p>APPLYING THE WEARING SURFACE <br />7.</p> <p>8.</p> <p>10</p> <p>After approx. 12 hours, brush and vacuum the surface <br />to completely remove the excess quartz sand. <br />Then use the ASOCRET-HFF cementitious industrial <br />flooring to rework the surface. <br />Use the spiked roller to de-aerate the fresh levelling <br />compound directly after applying it. In order to protect <br />the surface further, we recommend using the required <br />colour of ASODUR-V360W to rework the hardened <br />surface.</p> <p>2.</p> <p>3.</p> <p>4.</p> <p>3. <br />5.</p> <p>6.</p> <p>7.</p> <p>8.</p> <p>11</p> <p>The SCHOMBURG Group develops, <br />produces and distributes building product <br />systems for the areas of: <br />• Building waterproofing/repair <br />• Tile/natural stone/screed laying <br />• Floor protection/coating systems <br />SCHOMBURG has been recognised in <br />the market for over 85 years nationally and <br />internationally for its development expertise. <br />Building product systems that are produced <br />in-house are highly prized around the world.</p> <p>01/25 IsK/RiR</p> <p>SCHOMBURG GmbH <br />Aquafinstraße 2–8 <br />D-32760 Detmold (Germany) <br />Phone +49-5231-953-00 <br />Fax <br />+49-5231-953-333 <br />www.schomburg.com</p> <p>2D1023002</p> <p>To meet the demanding requirements <br />of an ever-changing market, we continuously <br />invest in the research and development <br />of new and already existing products. <br />This guarantees an ever increasing product <br />quality to the satisfaction of our customers.</p> <p>Changes reserved. The valid issue of the corresponding technical bulletin legally applies.</p> <p>Experts value the quality and the efficiency <br />of building product systems, the services <br />and therefore the core competence <br />of the group of companies.</p>
