SCHOMBURG-Produktflyer-Aquafin-i380-A4-270924_GB.pdf
2 Pages
3.49 MB
Download
<h1>SCHOMBURG-Produktflyer-Aquafin-i380-A4-270924_GB.pdf</h1> <p>SCHOMBURG <br />Problems Solved.</p> <p>AQUAFIN®-i380</p> <p>Injection cream for subsequent <br />horizontal barriers</p> <p>schomburg.com</p> <p>Subsequent horizontal barrier with <br />AQUAFIN®-i380</p> <p>How AQUAFIN®-i380 works</p> <p>AQUAFIN-i380 is a silane-based injection cream for subsequent <br />horizontal barriers, which is applied without any pressure and <br />has a hydrophobic action against rising damp in masonry work. <br />The material has been tested and certified in accordance with WTA <br />data sheet 4-10 at a penetrating moisture level of 95%.</p> <p>Classic aqueous horizontal barriers are used without any pressure at <br />a moisture penetration level of < 60% and in a low pressure technique <br />at > 60%. AQUAFIN-i380, on the other hand, can also be used <br />without any pressure at up to 95% moisture penetration.</p> <p>Masonry work without or with a defective horizontal barrier absorbs <br />more water due to the capillary structure, which can lead to moisture <br />damage and health risks due to issues such as mould. Retrospective <br />injection methods against rising damp are state of the art today. <br />AQUAFIN products have been tried and tested for 50 years.</p> <p>The fine active ingredient only reacts with the substrate – not with water <br />– and spreads quickly in the masonry work. As a result, the pores are <br />totally saturated, the capillary walls become water-repellent, water <br />transport is stopped and the substrate dries out.</p> <p>i</p> <p>Application of AQUAFIN®-i380</p> <p>1.</p> <p>2.</p> <p>Mark the drill holes at intervals of <br />10-12.5 cm.</p> <p>Drill injection holes with a diameter <br />≥ 12 mm. <br />The drilled hole depth is approx. <br />2 cm less than the masonry <br />thickness.</p> <p>Properties <br />• Not subject to labelling requirements/low emissions <br />• Ready to use <br />• Solvent free <br />• Hydrophobic action <br />• High penetration depth <br />• Halts capillary water transport <br />• High active ingredient content <br />• WTA-tested up to 95% moisture penetration <br />Advantages <br />• Simple, effective application <br />• High active ingredient distribution <br />• No run-off into cracks or voids <br />• Application without any pressure using an injection gun <br />• Can be mechanically applied using low pressure techniques <br />• No dilution or mixing necessary <br />• Low consumption <br />• Simple calculation of consumption</p> <p>SCHOMBURG <br />Problems Solved.</p> <p>AQUAFIN-i380 is a system component for retrospective <br />internal waterproofing in conjunction with e.g. <br />AQUAFIN-RB400 and the THERMOPAL restoration <br />plaster system.</p> <p>3.</p> <p>4.</p> <p>Clean the injection holes.</p> <p>Inject AQUAFIN-i380. <br />Then fully seal the holes with <br />ASOCRET-M30.</p> <p>Technical data <br />Basis</p> <p>Silane</p> <p>Consistency</p> <p>Creamy</p> <p>Colour</p> <p>White, transparent after drying</p> <p>Active ingredient content</p> <p>Approx. 80 wt. %</p> <p>Processing/substrate <br />temperature</p> <p>+5 °C to +30 °C</p> <p>Package type</p> <p>550 ml tubular bag <br />6 pcs/box and 5 litre container</p> <p>Storage</p> <p>Frost-free, min. 12 months in the original <br />unopened container</p> <p>Spec. weight</p> <p>Approx. 0.9 g/cm3</p> <p>SCHOMBURG GmbH <br />Aquafinstraße 2-8, D-32760 Detmold <br />www.schomburg.com</p>
