Installation on substrates with adhesive and paint residues
Water soluble paints and adhesive residues must be removed. Lacquers or oil based paints must be abraded as necessary. Prevent or impede rising damp from the substrate.
|
PRIMING
|
|
|
Rapid drying, quartz filled dispersion primer for absorbent and non-absorbent substrates
|
|
|
|
Universal primer based on epoxy resins
|
|
|
|
LEVELLING
|
|
|
Non-sag, cement-based, rapid hardening, polymer modified, low shrinkage and creamy smoothing compound, 2 – 50 mm
|
|
|
|
Smoothing compound from 2 – 30 mm, interior and exterior areas
|
|
|
|
DE-COUPLING/INSULATION
|
|
|
Thermally insulating impact sound deadening and de-coupling board, 4/9/15 mm
|
|
|
|
WATERPROOFING
|
|
|
Flexible, mineral-based, vapour permeable waterproof slurry for areas with increased demands in interior and exterior areas
|
|
|
|
One component flexible waterproof slurry, wall/floor
|
|
|
|
TILE INSTALLATION
|
|
|
Lightweight, low dust flexible adhesive for thin, medium and thick bed installation techniques
|
|
|
|
Rapid hardening, highly slump resistant flexible adhesive for interior and exterior use
|
|
|
|
Flexible natural stone adhesive
|
|
|
|
GROUTING
|
|
|
Rapid hardening flexible grout, 3 – 20 mm joint width
|
|
|
|
Mineral-based multi-function flexible grout for tiles, natural stone and other finishes from 1-10 mm joint widths with FAST TECHNOLOGY
|
|
|
|
Silicone sealant for movement joints
|
|
|
|
Silicone sealant for discolouration-free elastic jointing
|
|
|
