Share this page
back

COMBIDIC-2K-CLASSIC

2 component high-build bituminous coating (PMBC)

Print page

Product details

Description

Seam-free and jointless|flexible|crack-bridging|polystyrene filled

Areas of Application

  • For waterproofing buidling components in direct contact with the ground against ground moisture and non-pressing water (W1.1-E, W1.2-E in accordance with DIN 18533)
  • For waterproofing against pressing water (W2.1-E in accordance with DIN 18533)
  • For waterproofing against splashed water and ground moisture at the building skirt (W4-E in accordance with DIN 18533)
  • As retrospective structural waterproofing in accordance with the WTA information sheet 4-6
  • As an adhesive for insulation, protection and drainage boards

Advantages

  • Good slump resistance
  • Easy and economical installation
  • Can be applied by hand or mechanically

Consumption:

Structural waterproofing: ca. 4 - 5 l/m² depending on exposure conditions | Bonding of protection boards: ca. 1.3 l/m² per mm thickness

To the calculator

Article-No. Color Packaging size Unit/Pallet Repackaging
204912-002 black 30 l/combination packaging 18 -

Downloads

Additional Technical Information
43_Machine-compatible bitumen products slurries and injection products 43_Machine-compatible bitumen products slurries and injection products
Brochures
Waterproofing of buildings planning correctly - Reliably and effectivelymaintaining building value Waterproofing of buildings planning correctly - Reliably and effectivelymaintaining building value
Environmental Product Declaration (EPD)
Polymer-enhanced bituminous thick layer compounds Polymer-enhanced bituminous thick layer compounds
Safety Data Sheet (SDS)
COMBIDIC-2K-CLASSIC (Comp. A) COMBIDIC-2K-CLASSIC (Comp. A)
COMBIDIC-2K-CLASSIC (Comp. B) COMBIDIC-2K-CLASSIC (Comp. B)
Technical Data Sheet
COMBIDIC-2K-CLASSIC COMBIDIC-2K-CLASSIC
Technical Drawings (PDF)
1.2.2 Exterior basement waterproofing (wall/floor area) with COMBIFLEX-High Build System 1.2.2 Exterior basement waterproofing (wall/floor area) with COMBIFLEX-High Build System
1.2.3 Waterproofing in socket area with COMBIFLEX-High Build System 1.2.3 Waterproofing in socket area with COMBIFLEX-High Build System
1.2.4 Pipe penetration waterproofing with COMBIFLEX-High Build System 1.2.4 Pipe penetration waterproofing with COMBIFLEX-High Build System
1.2.5 Pipe penetration waterproofing with COMBIFLEX-High Build System 1.2.5 Pipe penetration waterproofing with COMBIFLEX-High Build System
1.2.6 Pipe penetration waterproofing with COMBIFLEX-High Build System 1.2.6 Pipe penetration waterproofing with COMBIFLEX-High Build System

References

Ibis Center Vilnius, Lithuania
More…
Schulzentrum Horn-Bad Meinberg
More…
Museum – Castle in Łańcut, Poland
More…