Installation of large format tiles and boards on wood substrates
A particularly rapid, easy and water free solution for levelling substrates is offered by the lightweight epoxy screed ASODUR-LE. When installing large format tiles with an edge length over 40 cm and a surface area over 0.18 m², we recommend the following construction build-up.
Print page
|
PRIMING
|
|
Universal epoxy based primer
|
|
|
In rooms in which AgBB regulations apply, prime with the binder from ASODUR-LE
|
|
|
|
LEVELLING
|
|
|
WATERPROOFING
|
|
One component flexible waterproof slurry, wall/floor
|
|
|
Flexible, mineral-based, vapour permeable waterproof slurry for areas with increased demands in interior and exterior areas
|
|
|
Fabric reinforced sheet style bonded waterproof membrane
|
|
|
|
TILE INSTALLATION
|
|
|
|
|
Lightweight, low dust flexible adhesive for thin, medium and thick bed installation techniques
|
|
|
Rapid hardening, ductile flexible adhesive S1 for interior and exterior use
|
|
|
Grey, highly flexible adhesive for interior and exterior use
|
|
|
|
GROUTING
|
|
Mineral-based multi-function flexible grout for tiles, natural stone and other finishes from 1-10 mm joint widths with FAST TECHNOLOGY
|
|
|
Rapid hardening flexible grout, 3 – 20 mm joint width
|
|
|
Silicone sealant for discolouration-free elastic jointing
|
|
|
Silicone sealant for movement joints
|
|
|