Installation on substrates with adhesive and paint residues
Water soluble paints and adhesive residues must be removed. Lacquers or oil based paints must be abraded as necessary. Prevent or impede rising damp from the substrate.
Print page
|
PRIMING
|
|
Rapid drying, quartz filled dispersion primer for absorbent and non-absorbent substrates
|
|
|
Universal primer based on epoxy resins
|
|
|
|
LEVELLING
|
|
Smoothing compound from 2 – 30 mm, interior and exterior areas
|
|
|
Non-sag, cement-based, rapid hardening, polymer modified, low shrinkage and creamy smoothing compound, 2 – 50 mm
|
|
|
|
DE-COUPLING/INSULATION
|
|
Thermally insulating impact sound deadening and de-coupling board, 4/9/15 mm
|
|
|
|
WATERPROOFING
|
|
One component flexible waterproof slurry, wall/floor
|
|
|
Flexible, mineral-based, vapour permeable waterproof slurry for areas with increased demands in interior and exterior areas
|
|
|
|
TILE INSTALLATION
|
|
Rapid hardening, highly slump resistant flexible adhesive for interior and exterior use
|
|
|
Flexible natural stone adhesive
|
|
|
Lightweight, low dust flexible adhesive for thin, medium and thick bed installation techniques
|
|
|
|
GROUTING
|
|
Mineral-based multi-function flexible grout for tiles, natural stone and other finishes from 1-10 mm joint widths with FAST TECHNOLOGY
|
|
|
Rapid hardening flexible grout, 3 – 20 mm joint width
|
|
|
Silicone sealant for movement joints
|
|
|
Silicone sealant for discolouration-free elastic jointing
|
|
|