Share this page
back

Installation on lime sand blocks, bricks and aerated concrete masonry work

Blocks with binders (e.g. lime sand blocks) must have reached an age of at least 6 months before tiling (6 months after the production of the block) in order to prevent damage to the tiles, which can be traced back to shrinkage stresses.

Print page
PRIMING

Solvent free universal primer, water and alkali resistant

LEVELLING

Non-sag, cement-based, rapid hardening, polymer modified, low shrinkage and creamy smoothing compound, 2 – 50 mm

WATERPROOFING

One component flexible waterproof slurry, wall/floor

Fabric reinforced sheet style bonded waterproof membrane

Flexible, mineral-based, vapour permeable waterproof slurry for areas with increased demands in interior and exterior areas

TILE INSTALLATION

Flexible natural stone adhesive

Lightweight, low dust flexible adhesive for thin, medium and thick bed installation techniques

Grey, highly flexible adhesive for interior and exterior use

Highly deformable flexible adhesive for heavy duty areas

GROUTING

Silicone sealant for discolouration-free elastic jointing

Rapid hardening flexible grout, 3 – 20 mm joint width

Mineral-based multi-function flexible grout for tiles, natural stone and other finishes from 1 to 10 mm joint widths, with FAST TECHNOLOGY

Silicone sealant for movement joints

Simple to use grout, up to 6 mm joint widths