Installation on critical substrates
When carrying out building conversions or renovation work, one often encounters critical substrates, which have to be levelled, de-coupled and impact sound transmission reduced before installing tiles. Here the impact sound deadening and de-coupling board STEPBOARD can be used. To reliably prevent offsets in level, it is recommended that existing cracks in the substrate are adhesively sealed, e.g. ASODUR-K900.
Print page
|
PRIMING
|
|
Rapid drying, quartz filled dispersion primer for absorbent and non-absorbent substrates
|
|
|
|
LEVELLING
|
|
The selection depends on the substrate and demands of the area in use
|
|
|
|
DE-COUPLING/INSULATION
|
|
Thermally insulating impact sound deadening and de-coupling board, 4/9/15 mm
|
|
|
|
WATERPROOFING
|
|
Waterproofing and de-coupling membrane
|
|
|
Flexible, mineral-based, vapour permeable waterproof slurry for areas with increased demands in interior and exterior areas
|
|
|
|
TILE INSTALLATION
|
|
Accelerated hardening flow bed flexible mortar
|
|
|
Lightweight, low dust flexible adhesive for thin, medium and thick bed installation techniques
|
|
|
Rapid hardening, highly slump resistant flexible adhesive S1 for interior and exterior use
|
|
|
Flexible natural stone adhesive
|
|
|
|
GROUTING
|
|
Rapid hardening flexible grout, 3 – 20 mm joint width
|
|
|
Mineral-based multi-function flexible grout for tiles, natural stone and other finishes from 1-10 mm joint widths with FAST TECHNOLOGY
|
|
|
Silicone sealant for movement joints
|
|
|
Silicone sealant for discolouration-free elastic jointing
|
|
|