Waterproofing and installation in milking parlours
Milking parlours when correctly installed to suit demands should help a smooth continuous and efficient milking process to be carried out. The use of anti-slip tiles, which are safe underfoot meets the intense requirements for cleaning and hygiene. The bonded tiled system must also be highly resistant to chemicals and mechanical stresses.
Print page
|
LEVELLING
|
|
Alternatively a bonded screed together with a bonding slurry can be installed
|
|
|
When levelling is required a cement replacement system can be used together with a bonding agent
|
|
|
|
PRIMING
|
|
Epoxy resin-based barrier primer
|
|
|
|
WATERPROOFING
|
|
The waterproofing is carried out with different colours of the chemically resistant polyurethane waterproof membrane ASOFLEX-AKB with ASO-Joint-Tape-2000-S. The last coat is sanded with quartz sand.
|
|
|
|
TILE INSTALLATION
|
|
Epoxy resin-based, chemical resistant thin-bed mortar
|
|
|
|
GROUTING
|
|
Epoxy resin-based, chemical resistant grout
|
|
|
Chemical resistant fine grain epoxy grout, 3 component and solvent free
|
|
|
Polyurethane sealant for heavy duty movement joints
|
|
|